Foldable and Cytocompatible Sol-gel TiO2 Photonics

نویسندگان

  • Lan Li
  • Ping Zhang
  • Wei-Ming Wang
  • Hongtao Lin
  • Aidan B. Zerdoum
  • Sarah J. Geiger
  • Yangchen Liu
  • Nicholas Xiao
  • Yi Zou
  • Okechukwu Ogbuu
  • Qingyang Du
  • Xinqiao Jia
  • Jingjing Li
  • Juejun Hu
چکیده

Integrated photonics provides a miniaturized and potentially implantable platform to manipulate and enhance the interactions between light and biological molecules or tissues in in-vitro and in-vivo settings, and is thus being increasingly adopted in a wide cross-section of biomedical applications ranging from disease diagnosis to optogenetic neuromodulation. However, the mechanical rigidity of substrates traditionally used for photonic integration is fundamentally incompatible with soft biological tissues. Cytotoxicity of materials and chemicals used in photonic device processing imposes another constraint towards these biophotonic applications. Here we present thin film TiO2 as a viable material for biocompatible and flexible integrated photonics. Amorphous TiO2 films were deposited using a low temperature (<250 °C) sol-gel process fully compatible with monolithic integration on plastic substrates. High-index-contrast flexible optical waveguides and resonators were fabricated using the sol-gel TiO2 material, and resonator quality factors up to 20,000 were measured. Following a multi-neutral-axis mechanical design, these devices exhibit remarkable mechanical flexibility, and can sustain repeated folding without compromising their optical performance. Finally, we validated the low cytotoxicity of the sol-gel TiO2 devices through in-vitro cell culture tests. These results demonstrate the potential of sol-gel TiO2 as a promising material platform for novel biophotonic devices.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Synthesis and Characterization of Doped TiO2 Nanoparticles by the Sol-Gel Method and Investigation of Photocatalytic Activity

Cu2+,Ce3+-doped nanostructure TiO2 -coated Nd3+ (TiO2 /Nd3+) were prepared by sol-gel method. TiO2 were synthesized by the sol-gel method using tetra n-butyl orthotitanat (TBT) as a precursor. The prepared nanoparticles characterized by FT-IR, XRD, SEM- EDS and TEM. The XRD showed that the major phase of nanocomposite is anatase. The morphology of the TiO2/Nd3+/Cu2+and TiO2 /Nd3+/Ce3+ microsphe...

متن کامل

VISIBLE-LIGHT-ACTIVE NITROGEN DOPED TIO2 NANOPARTICLES PREPARED BY SOL-GEL ACID CATALYZED REACTION

Yellow-colored nitrogen doped TiO2 photocatalyst and a pure TiO2 powder were synthesized via sol-gel method using TiCl4 and urea as raw materials. However, the synthesis procedure for nitrogen doped TiO2 was catalyzed by acid that dialed with controlled precipitation and slow nucleation. According to XRD analysis, the nitrogen doped TiO2 consisted of anatase phase of titania which was a signifi...

متن کامل

Evaluation of Photocatalytic Activity of Fe Doped TiO2 Thin Film Prepared by sol-gel hot dip-coating

The application of Fe–TiO2 photocatalysis using sol–gel method by hot–dipping technique was investigated. Then, the influences of fabrication parameters, molar ratios of Fe to TiO2, the sol temperature, poly ethylene glycol (PEG) content and the number of dipping cycles on the photocatalytic activity in visible light region were mainly studied. The experimental results revealed the sample with ...

متن کامل

Investigation of corrosion protection properties of TiO2-CdO nanocomposite coating prepared by sol-gel method on copper

the Sol–gel nanocomposite coatings have been investigated for copper metal as a potential replacement for the hazardous and banned hexavalent chromate conversion coatings. TiO2–CdO nanocomposite thin films were deposited on copper using the sol–gel method. The sol-gel coatings were prepared using a sol obtained by the hydrolysis and condensation of tetra-o-butyl titanate. They were doped with c...

متن کامل

Sol-gel Synthesis of ZnO Nanoparticles and ZnO-TiO2-SiO2 Nanocomposites and Their Photo-catalyst Investigation in Methylene Blue Degradation

In this work firstly ZnO nanoparticles were synthesized via a simple precipitation method. At the second step titanium dioxide and silicon dioxide shell were synthesized on the core. For preparation ZnO-TiO2-SiO2 the sol product was calcinated at 500 ºC for 2h. Properties of the product were examined by X-raydiffraction pattern (XRD), scanning electron microscope (SEM) and Fourier transform inf...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 5  شماره 

صفحات  -

تاریخ انتشار 2015