Local membrane deformation and micro-injury lead to qualitatively different responses in osteoblasts

نویسندگان

  • G. Monserratt Lopez-Ayon
  • Heng-Yen Liu
  • Shu Xing
  • Osama M. Maria
  • Jeffrey M. LeDue
  • Helene Bourque
  • Peter Grutter
  • Svetlana V. Komarova
  • Daniel Isabey
  • Minh Nguyen
  • Núria Gavara
چکیده

Micro-damage of bone tissue is known to regulate bone turnover. However, it is unknown if individual bone cells can differentiate between membrane deformation and micro-injury. We generated osteoblasts from mouse bone marrow or bone morphogenetic protein 2-transfected C2C12 cells. Single cells were mechanically stimulated by indentation with the atomic force microscopy probe with variable force load either resulting in membrane deformation only, or leading to membrane penetration and micro-injury. Changes in the cytosolic free calcium concentration ([Ca (2+)] i) in fluo4-AM loaded cells were analyzed. When deformation only was induced, it resulted in an immediate elevation of [Ca (2+)] i which was localized to the probe periphery. Multiple consecutive local Ca (2+) responses were induced by sequential application of low level forces, with characteristic recovery time of ~2 s. The duration of [Ca (2+)] i elevations was directly proportional to the tip-cell contact time. In contrast, cell micro-injury resulted in transient global elevations of [Ca (2+)] i, the magnitude of which was independent of the tip-cell contact time. Sequential micro-injury of the same cell did not induce Ca (2+) response within 30 s of the first stimulation. Both local and global Ca (2+)elevations were blocked in Ca (2+)-free media or in the presence of stretch-activated channel blocker Gd (3+). In addition, amount of Ca (2+) released during global responses was significantly reduced in the presence of PLC inhibitor Et-18-OCH 3. Thus, we found qualitative differences in calcium responses to mechanical forces inducing only membrane deformation or deformation leading to micro-injury.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Mercury and Lead Levels in Common Soaps from Local Markets in Mashhad, Iran

Background: The potential toxicity of human exposure was investigated to heavy metals from diverse sources but few or none was on Iranian soaps. Hence, we aimed to determine the presence of lead and mercury in selected soaps commonly used in Mashhad, northeastern Iran. Methods: Different common brands of cosmetic, hygiene and contraband soaps were purchased from retail market of Mashhad in 2...

متن کامل

Numerical solution of unsteady flow on airfoils with vibrating local flexible membrane

  Unsteady flow separation on the airfoils with local flexible membrane (LFM) has been investigated in transient and laminar flows by the finite volume element method. A unique feature of the present method compared with the common computational fluid dynamic softwares, especially ANSYS CFX, is the modification using the physical influence scheme in convection fluxes at cell surfaces. In contr...

متن کامل

Creep Life Forecasting of Weldment

One of the yet unresolved engineering problems is forecasting the creep lives of weldment in a pragmatic way with sufficient accuracy. There are number of obstacles to circumvent including: complex material behavior, lack of accurate knowledge about the creep material behavior specially about the heat affected zones (HAZ),accurate and multi-axial creep damage models, etc. In general, creep life...

متن کامل

Performance of Membrane Bioreactor in Removal of Heavy Metals from Industrial Wastewater

Membrane technology is one of the few non-pollutant choices when selecting a treatment process. A membrane with suitable pore size can remove almost all pollutants without using any chemicals. In this research, chromium, zinc and lead were removed from synthetic wastewater by a membrane bioreactor. The results showed that by using a membrane bioreactor, the COD removal efficiency was increased ...

متن کامل

Full-field bulge testing using global digital image correlation

The miniature bulge test is an acknowledged method for characterizing freestanding thin films. Nevertheless, some discrepancies in the quantitative results from such tests can be found in literature, explained in part by erroneous assumptions in the analytical description used to compute the global stress and strain from the membrane pressure and deflection. In this research, a new method is pr...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره 3  شماره 

صفحات  -

تاریخ انتشار 2014