Investigation and Modeling of Electrical Discharge Machining Process Parameters for AISI 4340 steel
نویسندگان
چکیده
N. Annamalai, V. Sivaramakrishnan, B. Suresh kumar, N.Baskar Department of Mechanical Engineering, Mookambigai College of Engineering, Pudukkottai, Tamilnadu, India – 622502 [email protected] * Department of Mechanical Engineering, Roever Engineering College, Perambalur, Tamilnadu, India – 621212 [email protected] #3,*4 Department of Mechanical Engineering, M. A. M. College of Engineering, Tiruchirappalli, Tamilnadu, India – 621152 [email protected],[email protected]
منابع مشابه
Surface Roughness, Machining Force and FlankWear in Turning of Hardened AISI 4340 Steel with Coated Carbide Insert: Cutting Parameters Effects
The current experimental study is to investigate the effects of process parameters (cutting speed, feed rate and depth of cut) on performance characteristics (surface roughness, machining force and flank wear) in hard turning of AISI 4340 steel with multilayer CVD (TiN/TiCN/Al2O3) coated carbide insert. Combined effects of cutting parameter (v, f, d) on performance outputs (Ra, Fm and VB) ar...
متن کاملExperimental Study & Modeling of Surface Roughness in Turning of Hardened AISI 4340 Steel Using Coated Carbide Inserted
Turning of hardened steels using a single point cutting tool has replaced the cylindrical grinding now as it offers attractive benefits in terms of lower equipment costs, shorter set up time, fewer process setups, higher material removal rate, better surface quality and elimination of cutting fluids compared to cylindrical grinding. In order to obtain desired surface quality by machining, pr...
متن کاملImprovement of Surface Finish when EDM AISI 2312 Hot Worked Steel using Taguchi Approach and Genetic Algorithm
Nowadays, Electrical Discharge Machining (EDM) has become one of the most extensively used non-traditional material removal process. Its unique feature of using thermal energy to machine hard to machine electrically conductive materials is its distinctive advantage in the manufacturing of moulds, dies and aerospace components. Howevere, EDM is a costly process and hence proper selection of its ...
متن کاملModeling the machining parameters of AISI D2 tool steel material with multi wall carbon nano tube in electrical discharge machining process using response surface methodology
This work investigates the machining characteristics of American Iron and Steel Institute (AISI) D2 tool steel with copper as a tool electrode during electrical discharge machining (EDM) process. The multi wall carbon nano tube (MWCNT) is mixed with dielectric fluids in EDM process to analyze the surface characteristics of surface roughness. Regression model were developed to predict the surfac...
متن کاملExperimental Investigation of the Pulse and Plasma Flushing Efficiency in Electrical Discharge Machining
This paper presents a study of the relationship between Electrical Discharge Machining (EDM) parameters on the EDM efficiency factors using a full factorial design, based on pulse on-time, duty cycle and tool polarity parameters in EDM machining of AISI H13 tool steel. The results show that, in positive polarity, the plasma flushing efficiency and pulse efficiency increase according to the puls...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013