The Theoretical Analysis of Test Result's Errors for the Roller Type Automobile Brake Tester
نویسندگان
چکیده
The main testing parameter of the roller brake tester is the braking force. Actually, there are some differences in results even if the same vehicle is tested on the same tester. So it will bring trouble to evaluate the braking performance accurately. Based on force analysis, the mathematical model of the roller opposite force type automobile brake tester is built in this article. And then the factors of influencing braking force value will be analyzed by theoretical calculations Taking the instance of the Jianghuai light truck and using the mathematical model analyze influencing factors for testing results and calculate error value.The results showed that adhesion cofficients of between testing wheels and rollers and between non-testing wheels and floor, structure of the roller brake testor have an influece on testing results of braking force and structure of the roller brake testor is the least. The theoretical analysis provide references for comparison test among testing equipments of the braking performance.
منابع مشابه
Effect of Varying Silicon Carbide Particulate on the Mechanical Properties of Aluminium Based Alloy Automobile Brake Disc Component
In the current study, effect of varying Silicon Carbide particulate on the mechanical properties of Aluminium based alloy automobile brake disc component was investigated. The result of experimental investigation on mechanical properties of Silicon Carbide particle reinforced Aluminium Matrix was achieved for composite brake disc using universal tensile test machine, Rockwell hardness testing m...
متن کاملUsing New Techniques and Devices within the Set of Tiba Body Roller Hamming Robots
In this article, new techniques and technologies have been tried and tested in the installation and commissioning of Roller Home industrial robots, in order to produce a Tiba car with a focus on cost reduction. Due to the fact that press equipment for automobile parts requires a lot of expenses, it was decided to use robots with the same function of roller to reduce costs and increase the q...
متن کاملDynamics and Control on Double-drum Roller Maximum Brake Deceleration
Reducing start and stop time without destroying the pavement surface is important in enhancing productivity of double-drum roller and compact quality of asphalt pavement, but it is difficult in confirming the maximum brake deceleration or start acceleration of double-drum roller. Dynamic analysis is used in studying these questions, and a mathematic model of double-drum roller is established, b...
متن کاملTheoretical Analysis of a Relationship between Master/Wheel Cylinder Diameter Ratio and Brake Efficiency
In any brake system of an automobile or passenger vehicle, an increase in Master/Wheel cylinder diameter ratio leads to an increase in brake efficiency. This paper focuses on Master/Wheel cylinder diameter effect on the brake efficiency. A VISUAL BASIC computer code was developed for computation of Master/Wheel cylinder diameter ratio corresponding to break efficiency. Aided by the developed so...
متن کاملTest Analysis and Theoretical Calculation on Braking Distance of Automobile with ABS
Dongsheng Wu, Jun Li, Xiaoping Shu, Xiaojing Zha, Beili Xu School of Mechanical and Electronic Engineering, East China Jiaotong University,Nanchang 330013, P. R. China Abstract: Braking performance test methods are compared and analyzed .ABS will not work if the speed is too low when the automobile is tested by tester and load testing. Since the braking performance can not be evaluated accurate...
متن کامل