Effect of residual monomer on viscoelastic properties of pour denture base resins.
نویسندگان
چکیده
Recently, some fluid or pour resins have been introduced to simplify the processing of dentures. However, because of the presence of relatively high residual monomer, the mechanical properties of these resins are inferior to those of heat cured resins.1,2) The purpose of the present investigation is to measure the quantities of residual monomer and to investigate the effect of the residual monomer on the viscoelastic properties, which are relevant to the thermal distortion and to the creep or stress relaxation behaviour.
منابع مشابه
Determination of Residual Methylmethacrylate Monomerin Denture Base Resins by Gas Chromatography
Acrylic base resins are widely used in orthopedics and dental surgery. It is generally accepted that due to the incomplete conversion of methyl methacrylate (MMA) monomer to the polymer form during polymerization of the resin, some MMA monomers remain in the hardened material. MMA monomer has been reported to cause abnormalities or lesions in several organs of animals. Study of the literatures ...
متن کاملDetermination of Residual Methylmethacrylate Monomerin Denture Base Resins by Gas Chromatography
Acrylic base resins are widely used in orthopedics and dental surgery. It is generally accepted that due to the incomplete conversion of methyl methacrylate (MMA) monomer to the polymer form during polymerization of the resin, some MMA monomers remain in the hardened material. MMA monomer has been reported to cause abnormalities or lesions in several organs of animals. Study of the literatures ...
متن کاملThe residual monomer content and mechanical properties of CAD\CAM resins used in the fabrication of complete dentures as compared to heat cured resins
BACKGROUND The utilization of computer-assisted designing and computer-assisted milling CAD\CAM resins in the fabrication of removable prostheses is a modern-day concept that offers many advantages over the use of the traditional polymethylmethacrylate (PMMA). AIM This study instigated some of the mechanical properties of CAD\CAM denture base resin including the amount of residual monomer. ...
متن کاملA comparative evaluation of impact strength and residual monomer content in denture base resins processed by compression and injection molding technique
Objectives: This In-vitro study was designed to compare the Impact strength and Residual monomer content of conventional and high impact types of denture base resins polymerized by Compression and Injection molding technique with short curing cycle. Materials and Methods: Forty samples were made (twenty from each technique)in the dimension of 60 × 10 × 3 with 2 mm notch on the thickness side. T...
متن کاملThe role of residual monomer in PMMA powder and methods of polymerization in the finding of residual monomer in poly(methylmethacrylate) denture base.
The amount of residual monomer in methylmethacrylate resins used for denture bases is directly dependent on the polymerization procedure chosen. Residual monomer in PMMA powder has not yet been fully clarified. The aim of this study was to determine the amount of residual monomer in some PMMA powders used for denture bases. The study included determination of the amount of residual monomer in s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Dental materials journal
دوره 2 2 شماره
صفحات -
تاریخ انتشار 1983