Experimental based finite element simulation of cold isostatic pressing of metal powders
نویسندگان
چکیده
The present work addresses the various ingredients required for reliable finite element simulations of cold isostatic pressing (CIP) of metal powders. A plastic constitutive model for finite deformation is presented and implemented into an explicit finite element (FE) code. The FE implementation is verified so that numerical errors (both temporal and spatial errors) are kept under control. Thereafter, uniaxial die compaction experiments are performed required for determining the material parameters in the constitutive model. Subsequently they are applied for the simulation of a ‘‘complex’’ CIP process. The experimental observations of the complex CIP process were used to validate the overall method by comparing the FE results (final dimensions and average relative density) to the experimental observations. The numerical results (final dimensions and relative density) are in good agreement with the experimental observations. r 2007 Elsevier Ltd. All rights reserved.
منابع مشابه
Hardness and Densification Behaviour of Copper and Bronze Powders Compacted with Uniaxial Die and Cold Isostatic Pressing Processes
A. Eksi, Faculty of Engineering and Architecture, Çukurova University, Adana, Turkey, M. K. Kulekci, Faculty of Technical Education, Mersin University, Tarsus, Turkey In this study hardness and densification behaviour of copper and bronze powders under wet bag cold isostatic and uniaxial die pressing processes are examined. In uniaxial pressing the specimens were compacted up to a pressure of 8...
متن کاملExperimental and Finite Element Simulation of Nano-indentation on Metal Matrix Composites: Hardness Prediction
The scientific importance of nanocomposites are being increased due to their improvedproperties. This paper is divided into two parts. First, Al-Al2O3 nanocomposite wasproduced by using ball milling technique followed by cold compaction and sintering.Microstructure and morphology studies were done through SEM, TEM, and EDX anal-ysis on the produced powder. The mechanical properties of the produ...
متن کامل3D finite element study of temperature variations during equal channel angular pressing
Equal channel angular pressing is the most promising method of severe plastic deformation with the capability of producing ultrafine grained materials. These materials exhibit improved mechanical and physical properties compared with their coarse grained counter parts.The temperature variation in the sample during ECA-pressing is a key factor determining the final microstructure and mechanical ...
متن کاملExperimental and Numerical Investigation of Mechanical Properties in the Ultrasonic Assisted constraint groove pressing process of copper sheets
In this study, constraint groove pressing (CGP) process and ultrasonic assisted CGP (UCGP) process were investigated on the process forces, mechanical properties of the sheet, including hardness and tensile tests and grain size. Pure copper sheets were used as samples in this research. Samples were tested both with and without ultrasonic vibrations for mechanical properties and grain size up to...
متن کاملNumerical Simulation of the Hydrodynamics of a Two-Dimensional Gas—Solid Fluidized Bed by New Finite Volume Based Finite Element Method
n this work, computational fluid dynamics of the flow behavior in a cold flow of fluidized bed is studied. An improved finite volume based finite element method has been introduced to solve the two-phase gas/solid flow hydrodynamic equations. This method uses a collocated grid, where all variables are located at the nodal points. The fluid dynamic model for gas/solid two-phase flow is based on ...
متن کامل