A 50 mm BORE, 13 TESLA SUPERCONDUCTING MAGNET EMPLOYING A PREREACTED MULTIFILAMENTARY Nb3Sn CONDUCTOR
نویسندگان
چکیده
Following the construction of two hybrid magnets, we intend to build up a third hybrid magnet which will produce about 30 T. A prereacted multifilamentary Nb Sn conductor will be employed for the 12 T superconducting part of the hybrid. As a first step for the project, we have designed, constructed and tested a magnet which consists of 14 double-pancakes made of a prereacted multifilamentary Nb Sn conductor and a back up coil made of a Nb-Ti conductor. The satisfactory results of the test on the magnet, in which we succeeded to produce 13.4 T, have given us very bright prospects for the 30 T hybrid magnet project.
منابع مشابه
The degradation of the critical current density in a Nb3Sn tape conductor due to parallel and transversal strain
In order to investigate the influence of mechanical strain on the intrinsic critical current density, a tape conductor is selected as a simple two-dimensional model. In a tape geometry a homogeneous strain distribution can be generated with an external load. A new experimental setup is designed to maintain two different components of the strain tensor (transverse and axial) in a superconducting...
متن کاملSLAC-m-182 April 1966 A HIGH FIELD 1.3m SUPERCONDUCTING SPLIT COIL MAGNET WITH FORCED LIQUID HELIUh’I COOLING
The paper describes experiments with various superconducting type II cables and hollow conductor configurations, current distribution, size effect in superconductor and performance of multistranded superconducting stabilized cables and magnets. A 30 cm bore 70 kG split coil magnet with a total field energy of about 6 X lo6 joules currently being built at SLAC is presented and a new superconduct...
متن کاملEcho-Planar Imaging for a 9.4 Tesla Vertical-Bore Superconducting Magnet Using an Unshielded Gradient Coil
Echo-planar imaging (EPI) sequences were developed for a 9.4 Tesla vertical standard bore (~54 mm) superconducting magnet using an unshielded gradient coil optimized for live mice imaging and a data correction technique with reference scans. Because EPI requires fast switching of intense magnetic field gradients, eddy currents were induced in the surrounding metallic materials, e.g., the room t...
متن کاملDEVELOPMENT OF AN EXPERIMENTAL 10 T Nb 3 Sn DIPOLE MAGNET FOR THE CERN
An experimental 1 meter long twin aperture dipole magnet is developed using a high current density Nb3Sn conductor in order to attain a magnetic field well beyond 10 T at 4.2 K. The emphasis in this Nb3Sn project is on the highest possible field within the known LHC twin aperture configuration. A design target of 11.5 tesla was chosen, a value which can be achieved with the presently available ...
متن کاملA novel numerical mechanical model for the stress–strain distribution in superconducting cable-in-conduit conductors
Besides the temperature and magnetic field, the strain and stress state of the superconducting Nb3Sn wires in multi-stage twisted cable-in-conduit conductors (CICCs), as applied in ITER or high field magnets, strongly influence their transport properties. For an accurate quantitative prediction of the performance and a proper understanding of the underlying phenomena, a detailed analysis of the...
متن کامل