The Optimization Design of a Novel Slotted Microstrip Patch Antenna with Multi-Bands Using Adaptive Network-Based Fuzzy Inference System
نویسندگان
چکیده
This paper attempts to apply an adaptive network-based fuzzy inference system (ANFIS) for analysis of the resonant frequency of a single-layer single-patch microstrip rectangular patch antenna with two equal size slots which are placed on the patch in the form of parallel to resonance edges. The resonant frequency is calculated as the position of the slots is shifted from the right endpoint to the left endpoint on the patch between −4.2 mm ≤ Xslot ≤ 4.2 mm with the steps of 0.1 mm. The designed antenna is proposed for downlink of X band satellite, broadcasting satellite service, fixed-satellite service uplink, satellite (Earth-to-space), radio navigation, mobile-satellite (Earth-to-space), and KU band which can be achieved at the resonant frequencies of 7.2 GHz, 12.2 GHz, 14.6 GHz, 17.5 GHz and 19.3 GHz. Next, High Frequency Electromagnetic Field Simulation software (ANSYS HFSS) results for the prototype microstrip antenna are compared with the values obtained through ANFIS system. It can be concluded that the adaptive network-based fuzzy inference system in such designs can be conveniently used due to fuzzy system’s high approximation capability and much faster convergence rate. The best results for our ANFIS system can be obtained if Gaussian membership is used which leads to the mean absolute error of 1.4653.
منابع مشابه
Modified Rectangular Patch Antenna Loaded With Multiple C Slots for Multiple Applications
A new multiple C-slotted microstrip patch antenna is proposed in the present study. A patch antenna is a wide-beam narrowband antenna. The microstrip patch antenna consists of a very thin metallic strip (patch) placed a small fraction of a wavelength above a ground plane. The patch can be designed in any possible shape and normally made of conducting materials such as copper or gold. This study...
متن کاملMulti Attribute Analysis of a Novel Compact UWB Antenna with Via-fed Elements for Dual Band Notch Function (RESEARCH NOTE)
A compact microstrip-fed antenna with dual notched bands is proposed. First, a simple basic configuration is presented for Ultra Wide Band (UWB) applications and then the dual band notched structure is extended from the UWB one. The basic structure of the UWB antenna consists of a simple square radiating patch and a ground plane with a wide square slot on back of the substrate. A semi-circle sh...
متن کاملDual Band Slotted Patch Antenna for On/Off-body Communication
Body Centric Wireless Communication (BCWC) has been topic of much research in recent years. In this manuscript, a novel low-cost microstrip patch antenna is designed for on-/off-body communication with a dual-band operation. The proposed structure exhibits a monopole-like radiation pattern at 2.45 GHz and a broadside radiation at 4.8 GHz, simultaneously. Lateral dimensions of 42 mm × 46 mm and ...
متن کاملA Novel Quad-band Printed Antenna Design using a Multi-Slotted Patch for Cellular Communication
This article proposes a quad band patch antenna for mobile communication. The design requirements are to meet the 0.9 GHz, 1.8 GHz, 2.1 GHz and 2.45 GHz bands. The proposed antenna consists of a rectangular patch monopole printed antenna in which slotting technique is used to achieve multi band resonance. The Patch with three slotted lines generates four resonating frequencies to cover 0.9 GHz ...
متن کاملDesign Investigation of Microstrip Patch and Half-Mode Substrate Integrated Waveguide Cavity Hybrid Antenna Arrays
In this paper two linear arrays including a linear 1×4 and a planar 2×2 of microstrip patch and half-mode substrate integrated waveguide (SIW) cavity hybrid antenna are introduced and investigated. These are simply implemented using low cost single layer printed circuit board (PCB) process. The array element consists of a rectangular microstrip patch with appropriate dimensions in the vicinity ...
متن کامل