Soft lithography molding of polymer integrated optical devices: Reduction of the background residue

نویسندگان

  • George T. Paloczi
  • Yanyi Huang
  • Jacob Scheuer
  • Amnon Yariv
چکیده

Soft lithography molding is a promising technique for patterning polymer integrated optical devices, however the presence of a background residue has the potential to limit the usefulness of this technique. We present the soft lithography technique for fabricating polymer waveguides. Several effects of the background residue are investigated numerically, including the modal properties of an individual waveguide, the coupling ratio of a directional coupler, and the radiation loss in a waveguide bend. Experimentally, the residue is found to be reduced through dilution of the core polymer solution. We find that the force with which the soft mold is depressed on the substrate does not appreciably affect the waveguide thickness or the residue thickness. Optical microscope images show that the residue is thinnest next to the waveguide. © 2004 American Vacuum Society. @DOI: 10.1116/1.1767827#

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Soft lithography replication of polymeric microring optical resonators.

We have developed a soft lithography method to replicate polymeric integrated optical devices. In this method, the master device and the molded replica are made of the same materials, allowing direct comparison. To evaluate the quality of the replication, microring optical resonators are chosen as test devices because of their sensitivity to small fabrication errors. The master devices are prec...

متن کامل

High density nanostructure transfer in soft molding using polyurethane acrylate molds and polyelectrolyte multilayers

Here we present an alternative, new, unconventional lithographic technique developed to create dense and multilevel nanostructure pattern transfer using a highly accurate polyurethane acrylate (PU, MINS101m, Minuta Tech.) mold and a polyelectrolyte multilayer as the adhesion promotion layer. Specifically, we demonstrate the pattern transfer of periodic 80 nm lines with 400 nm height and complex...

متن کامل

Design and fabrication of nanoimprinted polymer optical devices

The need for accessible, flexible and low-cost functional optical devices and integrated optics is becoming increasingly acute as the optical communication network is expanding very fast. Polymer optical devices are expected to meet these requirements because they can be fabricated using a low-cost process with high manufacturing output. Polymer optics feature sizes down to 100 nm which could p...

متن کامل

Plastic masters-rigid templates for soft lithography.

We demonstrate a simple process for the fabrication of rigid plastic master molds for soft lithography directly from (poly)dimethysiloxane devices. Plastics masters (PMs) provide a cost-effective alternative to silicon-based masters and can be easily replicated without the need for cleanroom facilities. We have successfully demonstrated the use of plastics micromolding to generate both single a...

متن کامل

Nanoimprinted strain-controlled elastomeric gratings for optical wavelength tuning

We demonstrate strain-controlled gratings made of an organic elastomer, polydimethylsiloxane sPDMSd, which can achieve optical wavelength tuning by varying their spatial periods. The whole device structure presented in this work incorporates a nanoimprinted PDMS grating integrated with electrostatic microelectromechanical systems actuators on a silicon chip. The fabrication of the device combin...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2004