Modeling competitive adsorption of molybdate, sulfate, selenate, and selenite using a Freundlich-type multi-component isotherm.

نویسندگان

  • Chung-Hsin Wu
  • Chao-Yin Kuo
  • Shang-Lien Lo
  • Cheng-Fang Lin
چکیده

This study examined the interactions of MoO4(2-) + SO4(2-), MoO4(2-) + SeO4(2-), and MoO4(2-) + SeO3(2-) systems on gamma-Al2O3 to better understand the competitive adsorption of these anions in the natural environment. The Freundlich isotherms of anionic adsorption onto gamma-Al2O3 in single and binary solutes were also investigated to estimate the competition between these anions. Experimental results indicate that a higher concentration of competitive solute yields a higher efficiency of the competitive solute's prevention of MoO4(2-) adsorption. The most significant result was found in the MoO4(2-) + SeO3(2-) system. The Freundlich isotherm constant (n) increases with the competitive solute concentration. The suitability of a Freundlich-type isotherm, the Sheindorf-Rebuhn-Sheintuch (SRS) equation, and the modified SRS equation in representing the competitive adsorption of MoO4(2-), SO4(2-), SeO4(2-), and SeO3(2-) on gamma-Al2O3 surface, was also examined. Each set of isotherm data was found to conform to linear SRS expressions, allowing competition coefficients to be derived on a concentration basis for each binary-solute system. The competition coefficient aij and relative affinity coefficients alphaij can be seen as a way to quantify competitive interactions. The proposed SRS and modified SRS equations are simple mathematical expressions accounting for competitive interactions of anions present in a mixture for the range of concentrations over which each individual component exhibits Freundlich behavior.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modeling Competitive Adsorption of Molybdate, Sulfate,and Selenate on g-Al2O3 by the Triple-Layer Model

Modeling Competitive Adsorption of Molybdate, Sulfate, and Selenate on γ -Al2O3 by the Triple-Layer Model Chung-Hsin Wu,∗ Shang-Lien Lo,∗ Cheng-Fang Lin,∗ and Chao-Yin Kuo†,1 ∗Graduate Institute of Environmental Engineering, National Taiwan University, 71 Chou-Shan Road, Taipei, 106, Taiwan; and †Institute and Department of Labor Relations, Chinese Culture University, 55 Hwa Kong Road, Shih-Lin...

متن کامل

Adsorption mechanism of selenate and selenite on the binary oxide systems.

Removal of selenium oxyanions by the binary oxide systems, Al- or Fe-oxides mixed with X-ray noncrystalline SiO(2), was previously not well understood. This study evaluates the adsorption capacity and kinetics of selenium oxyanions by different metal hydroxides onto SiO(2), and uses X-ray absorption spectroscopy (XAS) to assess the interaction between selenium oxyanions and the sorbents at pH 5...

متن کامل

Understanding Selenium Mobility by Sorption and Extraction Processes in Surface Coal Mine Spoil

Surface coal mine spoil was studied to evaluate selenium (Se) mobility and solubility using batch experiments, column-Ieachmg techniques, and sequential and individual extraction processes. Both selenite and selenate followed linear isotherm patterns at relatively lower Se treatments, whereas over a broader solution Se concentraton range the sorption mechanism followed the Lanpuir model. The va...

متن کامل

Adsorption of Cd, Cu and Zn from aqueous solutions onto ferronickel slag under different potentially toxic metal combination.

Adsorption characteristics of potentially toxic metals in single- and multi-metal forms onto ferronickel slag were evaluated. Competitive sorption of metals by ferronickel slag has never been reported previously. The maximum adsorption capacities of toxic metals on ferronickel were in the order of Cd (10.2 mg g(-1)) > Cu (8.4 mg g(-1)) > Zn (4.4 mg g(-1)) in the single-metal adsorption isotherm...

متن کامل

Modeling sorption isotherms of volatile organic chemical mixtures in model and natural solids.

Parameters from single-component isotherm models were used in multicomponent isotherm models to predict the aqueous phase sorption of trichloroethylene (TCE) in the presence of tetrachloroethylene (PCE) in four zeolites, Tenax, and three natural solids. The Langmuir, the Polanyi-Dubinin, and the Freundlich or the Langmuir-Freundlich isotherm models were used to simulate single-component sorptio...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Chemosphere

دوره 47 3  شماره 

صفحات  -

تاریخ انتشار 2002