Effect of solution and post-mortem time on mechanical and histological properties of liver during cold preservation.
نویسندگان
چکیده
BACKGROUND In liver transplantation, the donor and recipient are in different locations most of the time, and longer preservation periods are inevitable. Hence, the choice of the preservation solution and the duration of the preservation period are critical for the success of the transplant surgery. OBJECTIVE In this study, we examine the mechanical and histological properties of the bovine liver tissue stored in Lactated Ringer's (control), HTK and UW solutions as a function of preservation period. METHODS The mechanical experiments are conducted with a shear rheometer on cylindrical tissue samples extracted from 3 bovine livers and the change in viscoelastic material properties of the bovine liver is characterized using the fractional derivative Kelvin-Voigt Model. Also, the histological examinations are performed on the same liver samples under a light microscope. RESULTS The results show that the preservation solution and period have a significant effect on the mechanical and histological properties of the liver tissue. The storage and loss shear moduli, the number of the apoptotic cells, the collagen accumulation, and the sinusoidal dilatation increase, and the glycogen deposition decreases as the preservation period is longer. CONCLUSIONS Based on the statistical analyses, we observe that the liver tissue is preserved well in all three solutions for up to 11 h. After then, UW solution provides a better preservation up to 29 h. However, for preservation periods longer than 29 h, HTK is a more effective preservation solution based on the least amount of change in mechanical properties. On the other hand, the highest correlation between the mechanical and histological properties is observed for the liver samples preserved in UW solution.
منابع مشابه
Effect of Thermomechanical Processing on the Microstructure and Mechanical Properties of a Duplex Stainless Steel
Duplex stainless steels (DSSS) have a microstructure composed of ferrite and austenite phases that gives them a very good combination of mechanical and corrosion properties. These steels are desirable for many applications in the chemical and petrochemical industries. In the present study, a type of stainless steel was cast, solution annealed at 1200°C for 60 min and then quenched in water. Ini...
متن کاملThe Hepatoprotective Effect of Sodium Nitrite on Cold Ischemia-Reperfusion Injury
Liver ischemia-reperfusion injury is a major cause of primary graft non-function or initial function failure post-transplantation. In this study, we examined the effects of sodium nitrite supplementation on liver IRI in either Lactated Ringer's (LR) solution or University of Wisconsin (UW) solution. The syngeneic recipients of liver grafts were also treated with or without nitrite by intra-peri...
متن کاملDetermination of Clostridium perfringenes in liver of men and women cadaver after death as an indicator for postmortem interrval
Background: Most medical research that is used to better understand how post-mortem interventions are estimated requires an examination of the physico-chemical properties of decomposition and the effects that environmental factors have on the decomposition process. Microorganisms are unique in nature and occupy almost every habitat. These organisms, which reside in larger hosts, form complex po...
متن کاملEvaluation of the Mechanical Properties of the cement treated Cold-in-Place Recycled Asphalt Mixtures
Cold-in-place recycling (CIR) is an environmentally sustainable alternative for preservation of asphalt pavements. A major disadvantage of this practice is the lower strength of the cold-in-place mixtures. Addition of cement into this type of mixture is a method for increasing its bearing capacity. The effect of cement content on the mechanical properties of the cold-in-place recycled asphalt m...
متن کاملEffect of Ti-microalloy Addition on the Formability and Mechanical Properties of a Low Carbon (ST14) Steel
A low carbon Al-killed Ti-added steel was produced in Mobarakeh Steel Complex in Iran. Mechanical properties and microstructural characterizations of steel in the as-cast, hot-rolled, cold-rolled and annealed conditions are presented. Dilatometery tests were carried out to measure the finishing and annealing temperatures of steel. It was found that the addition of small amounts of Ti increas...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Biorheology
دوره 51 1 شماره
صفحات -
تاریخ انتشار 2014