Fracture Toughness of Metal Castings
نویسندگان
چکیده
منابع مشابه
Effects of Silicon on Mechanical Properties and Fracture Toughness of Heavy-Section Ductile Cast Iron
The effects of silicon (Si) on the mechanical properties and fracture toughness of heavy-section ductile cast iron were investigated to develop material for spent-nuclear-fuel containers. Two castings with different Si contents of 1.78 wt.% and 2.74 wt.% were prepared. Four positions in the castings from the edge to the center, with different solidification cooling rates, were chosen for micros...
متن کاملFracture Analysis of Particulate Reinforced Metal Matrix Composites
A fracture analysis of highly loaded particulate reinforced composites was performed using laser moire interferometry to measure the displacements within the plastic zone at the tip of an advancing crack. Ten castings were made of five different particulate reinforcement-aluminum alloy combinations. Each casting included net-shape specimens which were used for the evaluation of fracture toughne...
متن کاملEffect of Aging on Fracture Toughness of Al6061-Graphite Particulate Composites
This article presents the investigative work conducted on the fracture toughness and microstructure of Al6061-9% graphite particulate composites. The requisite specimens for the fracture toughness testing were compact tension ones prepared using stir casting technique. The Al6061-9% graphite particulate metal matrix composite has been heat treated in the underaged condition. It is observed from...
متن کاملStudy on Iraqi bauxite ceramic reinforced Aluminum metal matrix composite synthesized by stir casting
For the past decades researchers are showing immense interest to investigate the natural advantage of preparation of composites from minerals such as bauxite particles, and proved their effectiveness as cost effective reinforcing agents in fabrication of high performance composites. This study, is a new attempt in using the Iraqi natural bauxite powder with different proportions (2wt%, 4wt%, an...
متن کاملMECHANICALAND METALLURGICAL PROPERTIES OFWIDE-GAP ALUMINOTHERMIC RAILWELDS
The wide-gap aluminothermic rail welds with root opening of 50-70 mm were produced using plain carbon steel rail and non-alloy aluminothermic charge. Mechanical properties and micro-structure of the weld metal and HAZ as well as the impact energy and the fracture toughness of the welds were investigated. The yield and tensile strength of wide-gap welds were about 98% and 95% of the base metal, ...
متن کامل