Tannin Treated Water for use in the Emulsion Polymerization of SBR
نویسندگان
چکیده
The toxicity of residues formed during water treatment is mainly a function of the chemicals used. The inorganic flocculants, when used, give rise to compounds harmful to humans and to the environment. An alternative solution is the use of tannins. However, despite the environmental benefits, when using tannin-based products in the treatment of industrial water, modifications may be imparted to the final product. In this work, tannin was evaluated as flocculating agent to treat the water used in the emulsion polymerization to produce SBR. The results show that good stability of the latex and acceptable color in the rubber can be achieved.
منابع مشابه
Pickering Emulsion Polymerization of Styrene-co-butyl Acrylate Nanoparticles by Using Cloisite Na+ as Surfactant
Cloisite Na+was used as a solid surfactant (stabilizer) in Pickering emulsion polymerization of styrene-co-butyl acrylate in presence of oil soluble initiator, azobisisobutyronitrile (AIBN) and water soluble initiator, potassium persulfate (KPS). Fourier transform infrared (FTIR) spectrum approved the corporation of Cloisite Na+ layers within the polymer matrix. Effect of clay content was a...
متن کاملManufacture of Microspheres as Carrier Particles for Active Biomolecules
A number of processes are available: condensation-, interfacial-, suspensionand emulsion-polymerization. Suspension and emulsion polymerization are the preferred methods for the commercial production of polymer microsphere carrier particles and reference/standard particles for calibration of scientific instruments. In general, emulsion polymerization produces a smaller particle size and a narro...
متن کاملCompetitive particle growth at different conditions of oligo-micelle formation in hydro-alcoholic solution of anionic double-chain emulsifier via batch emulsion polymerization of vinyl chloride
The condition of oligo-micelle formation of sodium di-isodecyl sulfosuccinate (SDIDS) emulsifier in hydroalcoholic solutions is used to study particle formation of vinyl chloride emulsion polymerization in a batch reactor. The change on micellization behavior was investigated by critical micelle concentration (CMC) and zeta potential parameters. To detect the occurrence of secondary nucleation ...
متن کاملThe use of inulin as fat replacer and its effect on texture and sensory properties of emulsion type sausages
The present study aimed to investigate the possibility of reducing energy content in emulsion type sausages by replacing fat with inulin. In the manufactured product, the fat content was reduced to 6%-18% and replaced by inulin and water. The quality of the resulting product was determined by chemical and texture profile analyses (TPA), color measurement and sensory evaluation. The results show...
متن کاملStudy on Processing and Performance Characteristics of Compouns Based on Emulsion / Solution Sbrs
Styrene Butadiene Rubbers (SBRs) are among the most useful synthetic rubbers which can be produced by two different methods of polymerization: emulsion and solution. These two polymerization methods lead to different final properties. In general, SBRs produced by the solution method (S-SBRs) have narrower Molecular Weight Distribution (MWD), higher content of cis-1,4 structure and lower glass t...
متن کامل