Behavior of cracked materials
نویسنده
چکیده
Abstract. Due to their microstructure, quasi brittle materials present rough cracks. Under sliding of the crack lips, this roughness involves in one hand induced opening and in the other hand some apparent plasticity which is due to the interlocking of the crack lips combined with Coulomb’s friction. The proposed model is written under the irreversible thermodynamics framework. Micromechanics uses the Del Piero and Owen’s structured deformation theory. Opening of the crack depends upon the crack shape and the relative sliding of the crack lips. The thermodynamic force associated to the sliding has the mechanical meaning of the force acting in order to make the crack slide. Yield surface is defined as a limitation of this force with respect to the Coulomb’s friction and the Barenblatt cohesion. The crack orientation is defined as the one for which the criterion is reached for the lowest stress level. A decreasing cohesion, respect to sliding is supposed. Tension and compression reference cases are envisaged.
منابع مشابه
Equilibrium condition nonlinear modeling of a cracked concrete beam using a 2D Galerkin finite volume solver
A constitutive model based on two–dimensional unstructured Galerkin finite volume method (GFVM) is introduced and applied for analyzing nonlinear behavior of cracked concrete structures in equilibrium condition. The developed iterative solver treats concrete as an orthotropic nonlinear material and considers the softening and hardening behavior of concrete under compression and tension by using...
متن کاملOn-line analysis of hydro-abrasive erosion of pre-cracked materials by acoustic emission
Acoustic Emission (AE) sensing technique is used as a tool for on-line monitoring of hydro-abrasive erosion (HAE) of pre-cracked multiphase materials. As reference materials, ®ve types of concrete materials were used for the experimental study. Compression tests were performed to determine the mechanical properties and the failure behavior of these materials. Erosion parameters, such as abrasiv...
متن کاملNonlinear Dynamic Analysis of Cracked Micro-Beams Below and at the Onset of Dynamic Pull-In Instability
In this paper, the effect of the crack on dynamic behavior of cracked micro-beam in the presence of DC and AC loads are investigated. By applying the residual axial stress and fringing field stress, a nonlinear analytical model of cracked micro-beam is presented and crack is modeled by a massless rotational spring. The governing equation of the system is solved using Galerkin procedure and shoo...
متن کاملAnalyses of Buckling and Stable Tearing in Thin-Sheet Materials
This paper was to verify the STAGS (general shell, geometric and material nonlinear) code and the critical crack-tip-opening angle (CTOA) fracture criterion for predicting stable tearing in cracked panels that fail with severe out-of-plane buckling. Materials considered ranged from brittle to ductile behavior. Test data used in this study are reported elsewhere. The STAGS code was used to model...
متن کاملBounds on the Effective Moduli of Cracked Materials
We find bounds on the effective elastic moduli of cracked materials in terms of the effective conductivity of such media. These represent the first non-trivial bounds on the effective properties of cracked media which are independent of the shapes and spatial distribution of the cracks. Different approximations for the elastic moduli of cracked media are tested against our bounds. The microgeom...
متن کاملA numerical and experimental study on buckling and post-buckling of cracked plates under axial compression load
Existence of cracks in industrial structures is one of the important causes of their failure, especially when they are subjected to important axial compressive forces that might lead to buckling. Therefore, it must be considered in stress analysis and designing and loading of such structures. In this paper, the buckling and post-buckling behaviors of stainless-steel cracked plates under axial c...
متن کامل