Perovskite-like Metal Formates with Weak Ferromagnetism and as Precursors to Amorphous Materials.

نویسندگان

  • Xin-Yi Wang
  • Lin Gan
  • Shi-Wei Zhang
  • Song Gao
چکیده

Three isomorphous compounds M(CHOO)3[NH2(CH3)2] (M = Mn(1 x Mn), Co(2 x Co), Ni(3 x Ni)) have been synthesized in solvothermal conditions. Single-crystal X-ray diffraction shows that they are all crystallized in the trigonal space group R c with small differences in the lattice parameters. Bridged by the three-atom single-bridge CHOO-, M ions form a three-dimensional distorted perovskite-like structure with dimethylamine (DMA) cations located in the cages of the network. Based on the magnetic data, these three 3D compounds are weak ferromagnets with the critical temperature Tc = 8.5 K (1 x Mn), 14.9 K (2 x Co), and 35.6 K (3 x Ni), and for 2 x Co and 3 x Ni, spin reorientation might take place at 13.1 and 14.3 K, respectively. At 1.8 K, hysteresis loops can be observed for all three compounds with the coercivity field ca. 90 Oe (1 x Mn), 920 Oe (2 x Co), and 320 Oe (3 x Ni). The canting angles are estimated to be 0.08 degrees, 0.5 degrees, and 0.6 degrees for 1 x Mn, 2 x Co, and 3.Ni, respectively. The magnetic coupling between MnII ions in 1.Mn was estimated based on the model developed by Rushbrook and Wood for a Heisenberg antiferromagnet on a simple cubic lattice and the best fit gives J = -0.23 cm(-1). At the same time, according to molecular field theory of antiferromagnetism, the J values for compounds 1 x Mn, 2 x Co, and 3 x Ni were estimated to be -0.32 cm(-1), -2.3 cm(-1), and -4.85 cm(-1), respectively. The spin cant in these compounds may originate from the noncentrosymmetric character of the three-atom single-bridge CHOO-. Furthermore, amorphous materials 4 x Mn238, 5 x Mn450, 6 x Co320, and 7 x Ni300 were prepared from precursors 1-3 under an argon atmosphere at different temperatures according to the thermogravimetric analyses. As an interesting result, 5 x Mn450 was confirmed to be an amorphous form of Mn3O4 with a considerably large coercivity field HC = 4.1 kOe at 30 K compared to that value (250 Oe) for bulk Mn3O4.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Synthesis of Nano-Structured La0.6Sr0.4Co0.2Fe0.8O3 Perovskite by Co-Precipitation Method

Nano-structured lanthanum strontium cobalt ferrite, La0.6Sr0.4Co0.2Fe0.8O3 (LSCF), was successfully synthesized via co-precipitation method using metal nitrates as starting materials. Effects of precipitating agent and calcination temperature on the phase composition and morphology of synthesized powders were systematically studied using X-ray diffraction (XRD) and field emission scanning elect...

متن کامل

Garden-like perovskite superstructures with enhanced photocatalytic activity.

By subjecting amorphous flower-like TiO2 to a facile hydrothermal synthesis in the presence of Sr(2+), garden-like perovskite SrTiO3 superstructures were achieved. The amorphous TiO2 was preformed using ZnO flowers as templates. Different three-dimensional SrTiO3 architectures were coexisted in the garden, including SrTiO3 flowers composed of several hollow sword-shaped petals, many sheet-shape...

متن کامل

Investigation of embedded perovskite nanoparticles for enhanced capacitor permittivities.

Growth experiments show significant differences in the crystallization of ultrathin CaTiO3 layers on polycrystalline Pt surfaces. While the deposition of ultrathin layers below crystallization temperature inhibits the full layer crystallization, local epitaxial growth of CaTiO3 crystals on top of specific oriented Pt crystals occurs. The result is a formation of crystals embedded in an amorphou...

متن کامل

Chemical precipitation and characterization of multicomponent Perovskite Oxide nanoparticles – possible cathode materials for low temperature solid Oxide fuel cell

A set of multicomponent perovskite oxide nanoparticles based on La1-xSrxCo1-yFeyO3-δ(LSCF) were prepared by a simple chemical precipitation method for application in low temperature solid oxide fuel cells (LT-SOFC) as cathode materials.  The precursor materials used in this synthesis were lanthanum nitrate hexahydrate [La(NO3)<su...

متن کامل

Synthesis and Characterization of Nano-Structure Copper Oxide From Two Different Copper (II) Metal-Organic Framework Precursors

Nano-structured copper oxides were successfully prepared through direct calcination of 1D ladderlike metal-organic framework [Cu2(btec)(2,2'-bipy)2]∞, (btec = 1,2,4,5-benzenetetracarboxylate and 2,2'-bipy = 2,2'-bipyridine) and porous coordination polymer [Cu(BDC)(bipy)](BDCH2), (BDC = 1,4-benzenedicarboxylate; bipy = 4,4'-bipyridine). The nano-structure of the as-synthesized samples are charac...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Inorganic chemistry

دوره 43 15  شماره 

صفحات  -

تاریخ انتشار 2004