DeviceNet Interoperability Testing
ثبت نشده
چکیده
The term ‘interoperability’ has been mentioned in various electronic communications fields. In short it represents the “ability to operate between parties”. ‘Interoperability’ is sometimes defined as “how data is effectively exchanged and utilised between devices”. This statement reflects only the situation in the Application Layer. Interoperability should be the concern of all layers. In DeviceNet (and other protocols), an ideal and preferred system should contain products that are 100% interoperable with each other.
منابع مشابه
. EtherNet / IP TM on TI ’ s Sitara TM processors
interoperability of devices. Overview EtherNet/IPTM (EtherNet/Industrial Protocol) is an industrial automation networking protocol based on the IEEE 802.3 Ethernet standard that has dominated the world of IT networking for the past three decades. Despite Ethernet’s unparalleled success in a wide range of business applications, modifications for industrial applications are necessary because stan...
متن کاملSafety and Open, Real-time Industrial Ethernet Achievable With SafetyNET p
Ethernet for industrial communications Unlike office communications, industrial and process automation are based on a multitude of different fieldbus systems (e.g. ASI, CAN, DeviceNet, Interbus, LON, PROFIBUS). Particular versions with additional performance features have established themselves in parallel for specific applications such as drive technology or safety technology. Generally, these...
متن کاملPerformance Evaluation of Control Networks: Ethernet, ControlNet, and DeviceNet
1 Introduction The traditional communication architecture for control systems is point-to-point, which has been successfully implemented in industry for decades. However, expanding physical setups and functionality push the limits of the point-to-point architecture. Hence, a traditional centralized point-to-point control system is no longer suitable to meet new requirements , such as modularity...
متن کاملHigh Speed Ring-based Distributed Networked Control System for Real-time Multivariable Applications
T INT raditional centralized control architectures where a supervisory controller directly interfaces in a point-to-point fashion with all sensors and actuators in the system have been successfully implemented in the past. They are generally feasible when a controller interfaces with small number of sensors and actuators and requires short wiring to them. However, it is often difficult to add, ...
متن کاملDeviceNet reliability assessment using physical and data link layer parameters
Since the 1990s, the increasing deployments of networked automation systems led to increased manufacturing productivity, improved interchangeability of devices from different vendors, facilitated flexibility and reconfigurability for various applications and improved reliability, while reducing installation and maintenance costs. However, the reliability of a network has great impact on the rel...
متن کامل