Characterization of surface composition on Alloy 22 in neutral chloride solutions
نویسندگان
چکیده
The composition of anodically grown oxide films on Alloy 22, a Ni-Cr-Mo(W) alloy, has been investigated in 5mol l 1 NaCl at room temperature using X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry. For applied potentials up to 0.2 V (vs Ag/AgCl (saturated KCl solution)), a Cr(III) oxide barrier layer develops at the alloy/oxide interface accounting for the excellent passivity demonstrated to prevail in this potential region by previous electrochemical impedance spectroscopy measurements. At higher potentials, this layer is destroyed by defect injection as Cr(III) is oxidized to the more soluble Cr(VI). The overall oxide/hydroxide film thickness is, however, increased as Mo(VI)/W(VI) species accumulate at the oxide solution interface. The potential of 0.2V at which the barrier layer switches from growth to destruction coincides with the previously demonstrated threshold potential for the initiation of crevice corrosion. Copyright © 2012 John Wiley & Sons, Ltd.
منابع مشابه
A Study of the Chemical Composition and Heat Treatment of Electroless Ni-B-Tl Alloy Coating on AISI 316 Stainless Steel
Despite having some useful properties, stainless steels suffer from lack of suitable surface hardness. In this research electroless Ni-B-Tl coating was used with the aim to increase their surface hardness. The effects of Nickel chloride, Sodium borohydride, Thallium nitrate and Ethylendiamin on the chemical composition of coating were studied. To achieve an increase in hardness, the effects of ...
متن کاملInfluence of shape and finishing on the corrosion of palladium-based dental alloys
PURPOSE The purpose of this study was to evaluate the effects of the surface treatment and shape of the dental alloy on the composition of the prosthetic work and its metallic ion release in a corrosive medium after casting. MATERIALS AND METHODS Orion Argos (Pd-Ag) and Orion Vesta (Pd-Cu) were used to cast two crowns and two disks. One of each was polished while the other was not. Two as-rec...
متن کاملCorrosion behaviour of friction stir welded AZ61A magnesium alloy welds immersed in NaCl solutions
The extruded AZ61A magnesium alloy plates of 6 mm thickness were butt welded using friction stir welding (FSW) process. The corrosion behavior of the welds was evaluated by conducting immersion test in NaCl solution at different pH value, immersion time and chloride ion concentrations. An empirical relationship was established incorporating pH value, immersion time and chloride ion concentratio...
متن کاملCYCLIC POTENTIODYNAMIC POLARIZATION STUDY OF TERNARY PB -SN-CA ALLOY IN 2M H_2SO_4 SOLUTION
In this paper redox reaction processes and phase, formation on ternary Pb-2Sn-0.08Ca alloy utilized as insoluble lead anodes in copper electro winning cells, were investigated in 2M H__2SO__4 electrolytes, using cyclic voltammetry technique (CVA). A potential range between - 1.3V to 2.6V was chosen at various scan rates in order to study the anodic behavior and phase composition of the oxide la...
متن کاملHydroxyl capped silver-gold alloy nanoparticles: characterization and their combination effect with different antibiotics against Staphylococcus aureus
Objective(s): Metal nanoparticles (NPs) offer a wide variety of potential applications in pharmaceutical sciences due to the unique advances in nanotechnology research. In this work, bimetal Ag-Au alloy NPs were prepared and their combinations with other antibiotics were tested against Staphylococcus aureus. Materials and Methods: Firstly, Ag-Au alloy NPs with Au/Ag molar ratio of 1:1 was f...
متن کامل