Novel spiro-based hole transporting materials for efficient perovskite solar cells.
نویسندگان
چکیده
Three spiro-acridine-fluorene based hole transporting materials (HTMs), namely CW3, CW4 and CW5, are employed in the fabrication of organic-inorganic hybrid perovskite solar cells. The corresponding mesoscopic TiO2/CH3NH3PbI3/HTM devices are investigated and compared with that made with commercial spiro-OMeTAD. The best conversion efficiency of 16.56% is achieved for CW4 in the presence of tBp and Li-TFSI as additives and without a cobalt dopant. The performances of CW4 are further examined in terms of conductivity, mobility, morphology, and stability to show its potential as an alternative HTM.
منابع مشابه
Solution-Processed Cu(In, Ga)(S, Se)2 Nanocrystal as Inorganic Hole-Transporting Material for Efficient and Stable Perovskite Solar Cells
Perovskite solar cells are emerging as one of the most promising candidates for solar energy harvesting. To date, most of the high-performance perovskite solar cells have exclusively employed organic hole-transporting materials (HTMs) such as 2,2',7,7'-tetrakis-(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (spiro-OMeTAD) or polytriarylamine (PTAA) which are often expensive and have low hol...
متن کاملStar-shaped hole transporting materials with a triazine unit for efficient perovskite solar cells.
Novel star-shaped hole transporting materials with a triazine unit have been synthesized. When the new Triazine-Th-OMeTPA was used as a hole transporting material in perovskite solar cells, the power conversion efficiency reached 12.51% under AM 1.5 G (100 mW cm(-2)) illumination, showing competitive photovoltaic performance with the widely used spiro-OMeTAD based solar cell (13.45%).
متن کاملEfficiency Enhancement of Hybrid Perovskite Solar Cells with MEH-PPV Hole-Transporting Layers
In this study, hybrid perovskite solar cells are fabricated using poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) and poly(3-hexylthiophene-2,5-diyl) (P3HT) as dopant-free hole-transporting materials (HTMs), and two solution processes (one- and two-step methods, respectively) for preparing methylammonium lead iodide perovskite. By optimizing the concentrations and solvents o...
متن کاملInvestigation of the Effect of Band Offset and Mobility of Organic/Inorganic HTM Layers on the Performance of Perovskite Solar Cells
Abstract: Perovskite solar cells have become an attractive subject in the solar energydevice area. During ten years of development, the energy conversion efficiency has beenimproved from 2.2% to more than 22%, and it still has a very good potential for furtherenhancement. In this paper, a numerical model of the perovskite solar cell with thestructure of glass/ FTO/ TiO2/...
متن کاملStable and efficient hole transporting materials with a dimethylfluorenylamino moiety for perovskite solar cells.
Novel star-shaped hole transporting materials (HTMs) with a bis-dimethylfluorenylamino moiety have been synthesized and evaluated for high performance perovskite solar cell applications. Maximum power conversion efficiency of 14.21% has been achieved by using the HTM with a fused TPA core and the long-term stability was also shown to be comparable with that of .
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 51 85 شماره
صفحات -
تاریخ انتشار 2015