Sub-100 keV ion beam generation with a Van De Graaff accelerator using an external DC voltage supply

نویسنده

  • T. K. Chan
چکیده

0168-583X/$ see front matter 2011 Elsevier B.V. doi:10.1016/j.nimb.2011.08.014 ⇑ Corresponding author. E-mail address: [email protected] (T.K. Chan). We present a method to produce stable proton and helium ion beams with energies of 10–100 keV from a 30-year-old Van De Graaff accelerator using an external stabilized DC voltage supply instead of the belt charging system. Requiring no other modifications, this makes an ideal system for ion irradiation with fluences up to 10 ions/cm. Such ion energies and fluences are required in the emerging fields such as silicon micromachining using ion irradiation and we give examples of structures created with sizes as small as 200 nm. 2011 Elsevier B.V. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Cross-sectional Presentation and Basic Operational Principles of 3MV Van de Graaff Accelerator at Atomic Energy Centre, Dhaka

In 1964, a positive ion horizontal type Van de Graaff accelerator (KN3000) was installed at Atomic Energy Center, Dhaka (AECD). This accelerator was manufactured by the High Voltage Engineering Corporation, Burlington, Mass., USA. Van de Graaff accelerator consists of a number of operating parts related each other. This accelerator can produce and accelerate 3 MeV proton beam using Hydrogen, He...

متن کامل

طراحی و شبیه‌سازی ستون شتابدهنده دوترونی الکترواستاتیکی 2MV

In this paper design and simulation of an optimized accelerator tube is presented for the production of light charged particles up to energy of 2 MeV. Geometry of the accelerator tube electrodes was simulated based on the Van De Graaff accelerator tubes of Atomic Energy Organization by SIMION 7.0, Virtual Device and SIMION Toolkit codes. In accelerator tube, the extracted ion beam from the ion ...

متن کامل

Automation of a Particle Accelerator Operation Using LabVIEW

In this paper we present an automatic system developed for the Lisbon’s Technologic Nuclear Institute to control the operation of their particle accelerator. It is an accelerator based on a Van de Graaff machine. The system uses a personal computer running LabVIEW software which implements the procedures to automatically increase the terminal voltage, light-up the ion source and focus the parti...

متن کامل

Initial High Voltage Tests and Beam Injection Experi- Ments on Binp Proton Tandem-accelerator

The results of the tandem commissioning as initial high voltage tests and beam injection experiments on BINP proton tandem-accelerator are given. The accelerator is intended to be used in facilities generating resonant gamma rays for explosives detection and epithermal neutrons for boron neutron-capture therapy of brain tumors. A magnetically coupled DC voltage multiplier derived from an indust...

متن کامل

Shielding simulations for safe use of curtain electron accelerator by MCNP4C

In an electron curtain accelerator, when the electron beam passes through the titanium exit window of the accelerator chamber, X-ray photons are produced as a negative by-product of retarding accelerated electrons. Controlling the produced X-ray photons to avoid their detrimental effects or in fact, proper shielding of the accelerator is an important issue that has to be considered in the use o...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011