Frequency Response of Thin Film Chip Resistors
ثبت نشده
چکیده
High frequency measurements from 0.1 GHz to 40 GHz were performed on industry standard flip chip thin film resistors from Vishay Thin Film. The results of these measurements are reported in this paper. A lumped circuit model is presented that accurately predicts the response of various part values and case sizes. The results of the measurements and model are combined to demonstrate basic design guidelines for microwave thin film resistors.
منابع مشابه
ESD Sensitivity of Precision Chip Resistors Comparison between Foil and Thin Film Chips
The sensitivity level of resistors used in electronic equipment to an electrostatic discharge (ESD) varies from a few hundred volts to a few tens of kilovolts. Ways to make resistors more robust to ESD are suggested. The influence on ESD robustness of resistive element's size, resistive pattern design and ohmic value is discussed. Foil and thin film technologies are compared. In order to test t...
متن کاملThermal and Reliability Optimization of Resistors for MCM
An approach for thermal simulation and reliability evaluation of MCM film resistors is described. Result can be used to reach an optimal solution based on available data, technology, topology and material parameters. To achieve a high reliability level and performance of the resistors, the board must be designed taking into account the thermal consideration for each component. Result of thermal...
متن کاملEffect of Annealing Process on the Properties of Ni(55%)Cr(40%)Si(5%) Thin-Film Resistors
Resistors in integrated circuits (ICs) are implemented using diffused methods fabricated in the base and emitter regions of bipolar transistor or in source/drain regions of CMOS. Deposition of thin films on the wafer surface is another choice to fabricate the thin-film resistors in ICs' applications. In this study, Ni(55%)Cr(40%)Si(5%) (abbreviated as NiCrSi) in wt % was used as the target and ...
متن کاملPulse Load Capability of Precision Chip Resistors
Three test procedures were used to assess the Pulse Load Capability (PLC) the stability of precision foil and Thin Film chip resistors under pulses of increasing voltages for duration below 0.1 s, in three time ranges: milliseconds, microseconds and nanoseconds: • Test # 1 Rectangular pulses of durations between 100 ms and 0.1 ms • Test # 2 Exponential pulses (by capacitor discharge) of energy ...
متن کاملDevelopments of the Physical and Electrical Properties of NiCr and NiCrSi Single-Layer and Bi-Layer Nano-Scale Thin-Film Resistors
In this study, commercial-grade NiCr (80 wt % Ni, 20 wt % Cr) and NiCrSi (55 wt % Ni, 40 wt % Cr, 5 wt % Si) were used as targets and the sputtering method was used to deposit NiCr and NiCrSi thin films on Al₂O₃ and Si substrates at room temperature under different deposition time. X-ray diffraction patterns showed that the NiCr and NiCrSi thin films were amorphous phase, and the field-effect s...
متن کامل