All-PM coherent 2.05 µm Thulium/Holmium fiber frequency comb source at 100 MHz with up to 0.5 W average power and pulse duration down to 135 fs.
نویسندگان
چکیده
We report on a dual output all-PM fiber laser system running at 100 MHz repetition rate offering coherent broadband and narrowband pulses centered at 2.05 µm with a spectral FWHM bandwidth of 60 nm and 1.5 nm at up to 360 mW and 500 mW, respectively. The broadband pulses are compressed down to 135 fs. The multi-stage double-clad amplifier based on Tm/Ho codoping is seeded by a supercontinuum light source, spanning from around 1 µm up to 2.4 µm.
منابع مشابه
High average power picosecond pulse and supercontinuum generation from a thulium-doped, all-fiber amplifier.
We demonstrate a high-power, picosecond, thulium-doped, all-fiber master oscillator power amplifier with average power of 120.4 W. The compact fiber oscillator is carefully designed with high repetition rate for the purpose of overcoming the detrimental effects of fiber nonlinearity in the later fiber amplifiers. The pulse duration of 16 ps at 333.75 MHz repetition rate results in a peak power ...
متن کاملAll-fiber passively mode-locked thulium/holmium laser with two center wavelengths.
We have demonstrated a self-starting, passively mode-locked Tm/Ho codoped fiber laser that lases at one of two center wavelengths. An amplified 1.56 μm distributed feedback laser pumps a ring laser cavity which contains 1 m of Tm/Ho codoped silica fiber. Mode locking is obtained via nonlinear polarization rotation using a c-band polarization sensitive isolator with two polarization controllers....
متن کاملCavity-enhanced similariton Yb-fiber laser frequency comb: 3 x 10(14) W/cm2 peak intensity at 136 MHz.
We report on a passive cavity-enhanced Yb-fiber laser frequency comb generating 230 MW of peak power (3 kW of average power) at a 136 MHz pulse repetition rate. The intracativy peak intensity of 3 x 10(14) W/cm2 for the 95 fs pulse is sufficient to ionize noble gases, such as Xe, Kr, or Ar. The laser system is based on a mode-locked Yb-fiber similariton oscillator in conjunction with a cladding...
متن کاملAll fiber-based Yb-doped high energy, high power femtosecond fiber lasers.
Two all fiber-based laser systems are demonstrated to achieve high energy and high average power femtosecond pulsed outputs at wavelength of 1 µm. In the high energy laser system, a pulse energy of 1.05 mJ (0.85 mJ after pulse compressor) at 100 kHz repetition rate has been realized by a Yb-doped ultra large-core single-mode photonic crystal fiber (PCF) rod amplifier, seeded with a 50 µJ fiber ...
متن کاملHigh pulse energy 2 µm femtosecond fiber laser.
In the paper, a 2 µm high energy fs fiber laser and amplification system is presented based on Tm doped fibers. The seed laser was designed to generate pulse train at 2024 nm at a repetition rate of 2.5 MHz. An AOM was used as a pulse picker to further lower the repetition rate down to 100 kHz. Two-stage fiber pre-amplifiers and a high energy large mode area (LMA) fiber amplifier were used to b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Optics express
دوره 21 25 شماره
صفحات -
تاریخ انتشار 2013