Martensitic transformation of individual grains in low-alloyed TRIP steels
نویسندگان
چکیده
E. Jimenez-Melero,* N.H. van Dijk, L. Zhao, J. Sietsma, S.E. Offerman, J.P. Wright and S. van der Zwaag Fundamental Aspects of Materials and Energy, Faculty of Applied Sciences, Delft University of Technology, Mekelweg 15, 2629 JB Delft, The Netherlands Department of Materials Science and Engineering, Delft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands European Synchrotron Radiation Facility, 6 Rue Jules Horowitz, BP 220, 38043 Grenoble Cedex, France Faculty of Aerospace Engineering, Delft University of Technology, Kluijverweg 1, 2629 HS Delft, The Netherlands
منابع مشابه
Characterization of individual retained austenite grains and their stability in low-alloyed TRIP steels
In situ three-dimensional (3-D) X-ray diffraction experiments have been performed at a synchrotron source on low-alloyed multiphase TRIP steels containing 0.25 wt.% Si and 0.44 wt.% Al and produced with different bainitic holding times, in order to assess the influence of the bainitic transformation on the thermal stability of individual austenite grains with respect to their martensitic transf...
متن کاملThe effect of aluminium and phosphorus on the stability of individual austenite grains in TRIP steels
We have performed in situ synchrotron X-ray diffraction experiments to assess the influence of aluminium and phosphorus on the austenite stability in low-alloyed transformation-induced plasticity steels during the high-temperature bainitic holding and the subsequent martensitic transformation during cooling to temperatures between room temperature and 100 K. Although the addition of aluminium i...
متن کاملStress-Assisted Isothermal Martensitic Transformation Application to TRIP Steels
Low-temperature plastic flow in TRIP steels has been found to be controlled by stress-assisted isothermal martensitic transformation. For these conditions, the thermodynamics and kinetic theory of martensitic transformations leads directly to constitutive relations predicting the dependence of flow stress on temperature, strain, strain-rate, and stress-state, consistent with the observed behavi...
متن کاملHigh-energy X-ray diffraction study on the temperature-dependent mechanical stability of retained austenite in low-alloyed TRIP steels
The stability of the retained austenite has been studied in situ in low-alloyed transformation-induced-plasticity (TRIP) steels using high-energy X-ray diffraction during tensile tests at variable temperatures down to 153 K. A detailed powder diffraction analysis has been performed to probe the austenite-to-martensite transformation by characterizing the evolution of the phase fraction, load pa...
متن کاملA Novel 2d Analysis Method to Characterize Individual Grains Using High-energy X-ray Microbeam Diffraction
The design and development of new multiphase microstructures for specific technological applications require not only a characterization of the final microstructure, but also a detailed knowledge at the level of individual grains of the phase transformations taking place during the material processing. The availability of intense high-energy X-ray beams (50 to 300 keV) at a number of synchrotro...
متن کامل