PCR in a silicon microstructure.
نویسندگان
چکیده
Devices for performing polymerase chain reactions (PCR) have been developed for use with photolithographed silicon. Microchambers capable of holding between 5.0 and 10 microL of PCR reagents were constructed by etching specific areas of rectangular silicon chips (17 x 15 mm), which were then capped with Pyrex glass. These silicon devices (PCRChips), which were etched to depths of 40-80 microns, permitted free flow of fluids in the microchannels and microchambers. Access to the microchambers was through holes in the silicon. Thermal cycling of the PCR reagents was achieved by placing the disposable PCRChip in a small holder containing a computer-controlled Peltier heater-cooler. Successful amplification was demonstrated by electrophoresis of products in agarose gel containing ethidium bromide, and the migration of the product was compared with that obtained in a commercially available thermal cycler. The thermal characteristics of the silicon, coupled with the high surface area to volume ratio in the new devices, are particularly advantageous features for amplification by PCR.
منابع مشابه
The Microsegregation Pattern of Aluminum and Silicon in the Matrix Microstructure of the Nodular Cast Irons
متن کامل
The Microsegregation Pattern of Aluminum and Silicon in the Matrix Microstructure of the Nodular Cast Irons
متن کامل
Effect of Aluminum on Microstructure and Thickness of Galvanized Layers on Low Carbon silicon-Free Steel
In hot dip galvanizing, several parameters such as chemical composition of coating bath, immersion time and surface roughness of specimens could affect microstructure and properties of coating. In this article, the effect of aluminum content, immersion time and surface roughness on structure and properties of alloy layers have been investigated. Specimens of low carbon silicon-free steel with d...
متن کاملEffect of Particle Volume Fraction on the Tensile Properties of Composite Al6061/SiC Materials by Hot Extrusion
In the present study the effect of phase volume fraction on the reinforcement of microstructure and tensile properties of composite extrusion process Al6061/SiC has been studied. For this purpose, the base alloy Al6061 using pure aluminum ingots, silicon, of Al-50% Mg, Al-10% Cr and a thin copper rod was prepared. Next, the composite Al6061/5% SiC, Al6061/10% SiC, Al6061/15% SiC and Al6061/20% ...
متن کاملبررسی وابستگی میکروساختارهای سطحی سیلیکان متخلخل و خواص اپتیکی آن
We have studied the effect of increasing porosity and its microstructure surface variation on the optical and dielectric properties of porous silicon. It seems that porosity, as the surface roughness within the range of a few microns, shows quantum effect in the absorption and reflection process of porous silicon. Optical constants of porous silicon at normal incidence of light with wavelengt...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Clinical chemistry
دوره 40 9 شماره
صفحات -
تاریخ انتشار 1994