Montreux, Switzerland, 01-03 June 2005 FABRICATION OF SURFACE MICROMACHINED AlN PIEZOELECTRIC MICROSTRUCTURES AND ITS POTENTIAL APPLICATION TO RF RESONATORS

We report on a novel microfabrication method to fabricate aluminum nitride (AlN) piezoelectric microstructures down to 2 microns size by a surface micromachining process. Highly c-axis oriented AlN thin films are deposited between thin Cr electrodes on polysilicon structural layers by rf reactive sputtering. The top Cr layer is used both as a mask to etch the AlN thin films and as an electrode to actuate the AlN piezoelectric layer. The AlN layer is patterned anisotropically by wet etching using a TMAH (25%) solution. This multilayer stack uses silicon-di-oxide as a sacrificial layer to make free-standing structures. One-port scattering paramenter measurement using a network analyzer show a resonant frequency of 1.781 GHz on a clamped-clamped beam suspended structure. The effective electromechanical coupling factor is calculated as 2.4 % and the measured bandwidth is 13.5 MHz for one such a doubly clamped beam (990x30) μm.