Near Infrared 45°/0° Reflectance Factor of Pressed Polytetrafluoroethylene (PTFE) Powder
نویسندگان
چکیده
National Institute of Standards and Technology, Gaithersburg, MD 20899-0001 Pressed polytetrafluoroethylene (PTFE) powder is commonly used as a reflectance standard for bidirectional and hemispherical geometries. The wavelength dependence of the reflectance factor of PTFE is presented for the near-infrared spectral region (800 nm to 1600 nm) for the 458/08 geometry, as well as in the visible spectral region (380 nm to 800 nm) for comparison with previously published results.
منابع مشابه
Reflectance properties of pressed Algoflon F6: a replacement reflectance-standard material for Halon.
The standard ultraviolet through short-wave infrared (200-2500-nm) diffuse-reflectance material, Halon PTFE, type G-80, is no longer available. Therefore an equivalent diffuse-reflectance standard material must be found. Algoflon F6 is shown here to be an appropriate replacement through the presentation of measurements of various spectral-reflectance properties of Halon and Algoflon F6. The mea...
متن کاملStructure-property effects on mechanical, friction and wear properties of electron modified PTFE filled EPDM composite
Tribological properties of Ethylene-Propylene-Diene-rubber (EPDM) containing electron modified Polytetrafluoroethylene (PTFE) have been investiagted with the help of pin on disk tribometer without lubrication for a testing time of 2 hrs in atmospheric conditions at a sliding speed and applied normal load of 0.05 m·s–1 and FN = 1 N, respectively. Radiation-induced chemical changes in electron mo...
متن کاملA Wavelength Standard for the Near Infrared Based on the Reflectance Of Rare-Earth Oxides
This work describes the techniques used to prepare and analyze a reflectance wavelength standard composed of three rare-earth oxides. A mixture of dysprosium oxide (DY20.1), erbium oxide (Er203). and holmium oxide (Ho20) provides a pressed powder specimen exhibiting a near infrared reflectance spectrum characterized by many discrete absorption minima in the wavelength range 700 to 2000 urn. The...
متن کاملPreparation and characterization of poly(dimethylsiloxane)- polytetrafluoroethylene (PDMS-PTFE) composite membrane for pervaporation of chloroform from aqueous solution
−Hydrophobic polydimethylsiloxane polytetrafluoroethylene (PDMS-PTFE) flat-sheet membranes for pervaporation (PV) of chloroform from aqueous solution were successfully fabricated by solution casting method. The structures and the performance of the membranes was characterized by X-ray diffraction (XRD), scanning electron microscope combined with energy dispersive X-ray spectroscopy (SEM-EDXS), ...
متن کاملSintered Halon as a diffuse reflecting liner for light integration boxes
Sintered Halon G-80, a polytetrafluoroethylene (PTFE) resin available commercially in powdered form, is a superb diffuse reflector. Sintered Halon has > 96% absolute reflectance at wavelengths between 300 nm and 380 nm, and about 98% absolute reflectance above 380 rim. It is chemically inert, is mechanically strong, does not fluoresce, and the high reflectance is e&~y to maintain over time. We ...
متن کامل