Finite Element Analysis of Hardened Steel Cutting
ثبت نشده
چکیده
Hard machining, as attractive replacement for many rough and finish grinding operation, generates high cutting forces and temperature that enhance tool wear when act together. Therefore, the tool geometry and machining parameters have to be carefully optimized for a given material. Because of high cost and time consuming experimental work up-to-date advanced software for modeling and simulation brings quick and adequate solution. The aim of this contribution is to study the influence of cutting parameters on accompanying phenomena when hard turning process with mixed oxide ceramic inserts. Hardened steel with hardness of HRC 55 has been employed in modeling and trials. In order to better understand dynamics of cutting hardened steel, investigation has been performed making use finite element simulation in two dimension, and experimental analysis of cutting force. The potentiality of the model as well as the experimental results are compared and discussed.
منابع مشابه
Finite Element Simulation and Experiment of Chip Formation Process during High Speed Machining of AISI 1045 Hardened Steel
As an advanced manufacturing technology which has been developed rapidly in recent years, high speed machining is widely applied in many industries. The chip formation during high speed machining is a complicated material deformation and removing process. In research area of high speed machining, the prediction of chip morphology is a hot and difficult topic. A finite element method based on th...
متن کاملEFFECTS OF THE HARDENED NICKEL COATING ON THE FATIGUE BEHAVIOR OF CK45 STEEL: EXPERIMENTAL, FINITE ELEMENT METHOD, AND ARTIFICIAL NEURAL NETWORK MODELING
Hardened nickel coating is widely used in many industrial applications and manufacturing processes because of its benefits in improving the corrosion fatigue life. It is clear that increasing the coating thickness provides good protection against corrosion. However, it reduces the fatigue life. Thus, applying a thin layer of coated nickel might give an acceptable corrosion protection with minim...
متن کامل3-d Fea of Hard Turning: Investigation of Pcbn Cutting Tool Micro- Geometry Effects
In this study, 3-D finite element modeling of precision hard turning has been used to investigate the effects of cutting edge microgeometry on tool forces, temperatures and stresses in machining of AISI H13 steel using polycrystalline cubic boron nitrite (PCBN) inserts with two distinct edge preparations. Hard turning experiments were conducted to investigate the effects of cutting edge geometr...
متن کاملThermal Analysis of Laser Hardening for Different Moving Patterns
Transient thermal field in laser surface hardening treatment of medium carbon steel was analyzed by employing both three-dimensional analytical model and finite element model. In finite element model the laser beam was considered as a moving plane heat flux to establish the temperature rise distribution in the work-piece, while in analytical model laser beam was considered as an internal heat s...
متن کاملProcess Design Method of High Speed and Stable Cutting Hardened Steel
In view of the unstable cutting problem in the process of high speed milling hardened steel. Conduct experiment of the stability of machine tool and high speed milling cutter. The machine tool spindle vibration spectrum and vibration acceleration signal under the condition of different centrifugal force were detected. Obtained the critical speed of security and stability cutting of milling cutt...
متن کامل