A NEW APPROACH TO CONTROL SINGLE - LINK FLEXIBLE ARMS . PART I : Modelling and Identification in the Presence of Joint Friction
نویسندگان
چکیده
This report presents a new way to model and identify single-link flexible arms when Coulomb friction is present in the joint. In order to isolate the effects of this nonlinearity, the arm model is divided into two submodels: motor and beam. The two anm coupled through the torque at the base of the beam. A systematic method is developed to obtain the dynamics of a lumped-mass flexible beam, and some properties are obtained from this model. The influence of the payload on the model is given special attention. This way of modelling is later extended to the general case of distributed-mass flexible arms. Identification in the presence of Coulomb friction is carried out. A new method is proposed to estimae this friction and to reconstruct the motor frequency response from experimental results, which are highly distorted by this nonlinear friction. Experimental results are presented and, finally, conclusions are drawn.
منابع مشابه
Nonlinear Stabilizing Controller for a Special Class of Single Link Flexible Joint Robots
Joint flexibility is a very important factor to consider in the controller design for robot manipulators if high performance is expected. Most of the research works on control of flexible-joint robots in literature have ignored the actuator dynamics to avoid complexity in controller design. The problem of designing nonlinear controller for a class of single-link flexible-joint robot manipulator...
متن کاملA NEW APPROACH TO CONTROL SINGLE - LINK FLEXIBLE ARMS . PART Ik Control of the Tip Position in the Presence of Joint
This reporr presents a ncw way to control the tip position of single-link flexible arms when friction is present in the joint. In order to minimize the influence of the nonlinear components of this friction, the control scheme is composed of two nested loops: an inner loop that controls the motor position, and an outcr loop that controls the tip position. It is demonsuated that proper design of...
متن کاملA new approach to control single-link flexible arms
This report presents a new way to control the tip position of single-link flexible arms when friction is present in the joint. In order to minimize the influence of the nonlinear components of this friction, the control scheme is composed of two nested loops: an inner loop that controls the motor position, and an outer loop that controls the tip position. It is demonstrated that proper design o...
متن کاملFunction Approximation Approach for Robust Adaptive Control of Flexible joint Robots
This paper is concerned with the problem of designing a robust adaptive controller for flexible joint robots (FJR). Under the assumption of weak joint elasticity, FJR is firstly modeled and converted into singular perturbation form. The control law consists of a FAT-based adaptive control strategy and a simple correction term. The first term of the controller is used to stability of the slow dy...
متن کاملA New Type-2 Fuzzy Systems for Flexible-Joint Robot Arm Control
In this paper an adaptive neuro fuzzy inference system based on interval Gaussian type-2 fuzzy sets in the antecedent part and Gaussian type-1 fuzzy sets as coefficients of linear combination of input variables in the consequent part is presented. The capability of the proposed method (we named ANFIS2) to function approximation and dynamical system identification is shown. The ANFIS2 structure ...
متن کامل