Cytological response of palatal epithelium to TiN-coated CoCr alloy denture.
نویسندگان
چکیده
The aim of this study was to assess the impact of titanium nitride coatings on CoCr alloy metal parts in framework dentures on human palatal epithelium cytology compared to framework dentures made with the same alloy but without titanium nitride coating, and to acrylic dentures. Every prosthetic restoration introduced into the oral cavity and remaining in direct contact with the palate exhibits a varied and harmful effect on the state of the palatal epithelium by disturbing its keratinization. CoCr alloy dentures produce a significantly greater perturbation of keratinization compared to acrylic dentures. There is no evidence showing that a titanium nitride coating of the CoCr alloy plays a protective role in the environment of the oral cavity.
منابع مشابه
SURFACE STRUCTURE OF TIN/TI MULTI-LAYERED THIN FILMS DEPOSITED ONTO Ti-6Al-4V ALLOY BY MAGNETRON SPUTTERING
Ti-6Al-4V alloy attracting attention as a biomaterial features excellent mechanical properties and corrosion resistance, and super plasticity, so enables the forming of denture bases of complicated shapes. However, this alloy contains aluminum and vanadium liable to do serious harm to human bodies [1,2], so actual use will require prevention of direct contact with biological tissues. In our pre...
متن کاملEffect of cantilever length and alloy framework on the stress distribution in peri-implant area of cantilevered implant-supported fixed partial dentures
Because many mechanical variables are present in the oral cavity, the proper load transfer between the prosthesis and the bone is important for treatment planning and for the longevity of the implant-supported fixed partial denture. Objectives To verify the stress generated on the peri-implant area of cantilevered implant-supported fixed partial dentures and the potential effects of such variab...
متن کاملImproving Gas Sensing Properties of Tin Oxide Nanowires Palladium-Coated Using a Low Cost Technique
Thin films of SnO2 nanowires were successfully prepared by using chemical vapor deposition (CVD) process on quartz substrates. Afterwards, a thin layer of palladium (Pd) as a catalyst was coated on top of nanowires. For the deposition of Pd, a simple and low cost technique of spray pyrolysis was employed, which caused an intensive enhancement on the sensing response of fabricated sensors...
متن کاملEvaluation of roughness and micromorphology of epoxy paint on cobalt-chromium alloy before and after thermal cycling.
It has been suggested that the epoxy paint used to coat metal substrates in industrial electrostatic painting applications could also be used to mask metal clasps in removable dental prostheses (RDP). The purpose of this study was to evaluate both the influence of thermal cycling and the in vitro roughness of a surface after application of epoxy paint, as well as to assess the micromorphology o...
متن کاملOsseointegration of Ti6Al4V alloy implants coated with titanium nitride by a new method.
Coating titanium alloy implants with titanium nitride (TiN) by the method of Powder Immersion Reaction Assisted Coating (PIRAC) produces a stable layer on their surface. We have examined the ability of the new TiN coating to undergo osseointegration. We implanted TiN-coated and uncoated Ti6Al4V alloy pins into the femora of six-month-old female Wistar rats. SEM after two months showed a bone co...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Folia histochemica et cytobiologica
دوره 50 1 شماره
صفحات -
تاریخ انتشار 2012