An Analytical Electrothermal Model of a 1-D Electrothermal MEMS Micromirror
نویسندگان
چکیده
We have developed an analytical model that describes the steady-state thermal behavior of a 1-D electrothermal bimorph MEMS micromirror. The steady-state 1-D heat transport equation is used to solve for the temperature distribution of the device upon actuation. Three models are developed using different thermal conditions on the device. The models consider heat dissipation from conduction and convection and the temperature dependence of the actuator electrical resistor. The temperature distribution equation of each model is analyzed to find critical thermal parameters such as the position of maximum temperature, maximum temperature, average temperature, and equivalent thermal resistance. The simplest model, called the Case 1 model, is used to develop an electrothermal lumped element model that uses a single thermal power source. In the Case 1 model, it is shown that a parameter called the “balancing factor” predicts where the maximum temperature is located, the distribution of power flow, and the division of thermal resistances. The analytical models are compared to FEM simulations and agree within 20% for all of the actuation ranges and thermal conditions tested.
منابع مشابه
Design and characterization of a 3D MEMS VOA driven by hybrid electromagnetic and electrothermal actuation mechanisms
By using a CMOS compatible process technology, a MEMS variable optical attenuator (VOA) is characterized in terms of actuation mechanisms. A dual-fiber collimator is aligned perpendicularly to the micromirror in a three-dimensional (3D) free space configuration, where the micromirror is mechanically connected with an electromagnetic actuator and two sets of electrothermal actuators. Three types...
متن کاملSimulation of a Microgripper with Electrothermal Actuator Using COMSOL Software Based on the Finite Element Method
Micro-electro-mechanical systems (MEMs) are Combination of electrical and mechanical components in Micron dimensions. In recent years, holding, actuating methods and handling of MEMs components such as microgripper, microsensors and etc. have been deeply studied. Microgrippers for handling, positioning and assembling of micro components are very useful so that for clamping need actuation create...
متن کاملStudy of hybrid driven micromirrors for 3-D variable optical attenuator applications.
Aluminium-coated micromirrors driven by electrothermal and electromagnetic actuations have been demonstrated for 3-D variable optical attenuation applications. Three types of attenuation schemes based on electrothermal, electromagnetic and hybrid, i.e. combination of electrothermal and electromagnetic, actuations have been developed. In addition, two different designs have been fabricated and c...
متن کاملSimulation of a Microgripper with Electrothermal Actuator Using COMSOL Software Based on the Finite Element Method
Micro-electro-mechanical systems (MEMs) are Combination of electrical and mechanical components in Micron dimensions. In recent years, holding, actuating methods and handling of MEMs components such as microgripper, microsensors and etc. have been deeply studied. Microgrippers for handling, positioning and assembling of micro components are very useful so that for clamping need actuation create...
متن کامل