Phase formation during the decomposition of ammonium heptamolybdate--an in situ XAFS and XRD investigation.
نویسندگان
چکیده
The decomposition of ammonium heptamolybdate was investigated by in situ XAFS and in situ XRD to elucidate the influence of different atmospheres on the products formed the formation of different decomposition products and various intermediates is described in detail.
منابع مشابه
Formation of Bronzes during Temperature-programmed Reduction of MoO3 with Hydrogen - An In situ XRD and XAFS Study
The temperature-programmed reduction of MoO3 from 300 K to 773 K in 50 vol-% hydrogen in He (10 Pa) at different heating rates (0.1, 0.2, and 5 K/min) was investigated by in situ XRD and XAFS. At heating rates of ~ 0.1 and ~ 0.2 K/min the formation of the molybdenum bronze H0.34MoO3 was observed by in situ XRD in the early stage of the reduction of MoO3. At a heating rate of 5 K/min the formati...
متن کاملFabrication, characterization and investigation of gas sensing properties of MoO3 thin films
In this research, molybdenum oxide (α-MoO3) thin films were coated on glass substrates using spray pyrolysis technique. 0.05 M ammonium heptamolybdate tetrahydrate was used as precursor and deionized water as solvent. The effects of carrier gas pressure, during the spraying of the solution, on the structural, optical, morphological and gas sensing properties of thin films were studied. X-ray di...
متن کاملInvestigation of the effect of phosphate agent type on setting time, flowability, hydration and dehydration of magnesium phosphate cement.
Magnesium phosphate cements (MPC) are the most developed kind of chemically bonded ceramics which form through the reaction of magnesium oxide and soluble phosphate salts. Therefore, study of different magnesium phosphate cement systems is considered important according to the type of phosphate agent used. In this study, effect of mono-ammonium phosphate (MAP), di-ammonium phosphate (DAP), and ...
متن کاملIn Situ Chemical Oxidative Graft Polymerization of Aniline from Fe3O4 Nanoparticles
This study aims at exploring an effective route in the in situ graft polymerization of aniline from Fe3O4 nanoparticles. To this goal, Fe3O4 magnetic nanoparticles were prepared by coprecipitation method using ammonia solution as the precipitating agent, and were characterized by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) and transmission electron microscopy (TEM)....
متن کاملSynthesis of CuO Nanoparticles and Study on their Catalytic Properties
In this research, CuO spherical-like nanoparticles were synthesized using the planetary ball mill method. The structure, particle size and morphology of the resulting CuO nanoparticles were characterized by XRD (X-ray diffraction), SEM (scanning electron microscopy) and SAXS (small-angle X-ray scattering) methods. The results of this investigation showed ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of synchrotron radiation
دوره 8 Pt 2 شماره
صفحات -
تاریخ انتشار 2001