Persistent photoconductivity in strontium titanate.
نویسندگان
چکیده
Persistent photoconductivity was observed in strontium titanate (SrTiO(3)) single crystals. When exposed to sub-bandgap light (2.9 eV or higher) at room temperature, the free-electron concentration increases by over 2 orders of magnitude. After the light is turned off, the enhanced conductivity persists for several days, with negligible decay. From positron lifetime measurements, the persistent photoconductivity is attributed to the excitation of an electron from a titanium vacancy defect into the conduction band, with a very low recapture rate.
منابع مشابه
Dynamic defect correlations dominate activated electronic transport in SrTiO3
Strontium titanate (SrTiO3, STO) is a critically important material for the study of emergent electronic phases in complex oxides, as well as for the development of applications based on their heterostructures. Despite the large body of knowledge on STO, there are still many uncertainties regarding the role of defects in the properties of STO, including their influence on ferroelectricity in bu...
متن کاملSynthesis and characterization of Barium Strontium Titanate (BST) micro/nanostructures prepared by improved methods
Nowadays various methods are presented for synthesis of barium strontium titanate (BST) nanopowders with different morphology and properties. Each of these (BST)s has got individual characterization that makes it suitable for a special application. Every method has a special quality, causes it to have preference over the other methods. Low processing temperature is a desired point which most of...
متن کاملSynthesis and characterization of Barium Strontium Titanate (BST) micro/nanostructures prepared by improved methods
Nowadays various methods are presented for synthesis of barium strontium titanate (BST) nanopowders with different morphology and properties. Each of these (BST)s has got individual characterization that makes it suitable for a special application. Every method has a special quality, causes it to have preference over the other methods. Low processing temperature is a desired point which most of...
متن کاملAll Roads Lead to TiO2: TiO2‐Rich Surfaces of Barium and Strontium Titanate Prepared by Hydrothermal Synthesis
Through high-resolution electron microscopy, the surface structure of barium titanate and strontium titanate nanoparticles are found to be terminated by a TiO2 double layer. These results confirm prior observations of TiO2-rich surface reconstructions on strontium titanate nanoparticles made hydrothermally at high pH and single crystals prepared with wet chemical etching. Of all the reconstruct...
متن کاملSynthesis of single-crystalline perovskite nanorods composed of barium titanate and strontium titanate.
We report the solution-based synthesis of single-crystalline nanorods composed of barium titanate (BaTiO3) and strontium titanate (SrTiO3), which yields well-isolated nanorods with diameters ranging from 5 to 60 nm and lengths reaching up to >10 mum. Electron microscopy and diffraction measurements show that these nanorods are composed of single-crystalline cubic perovskite BaTiO3 and SrTiO3 wi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Physical review letters
دوره 111 18 شماره
صفحات -
تاریخ انتشار 2013