High-speed tapping mode imaging with active Q control for atomic force microscopy
نویسندگان
چکیده
Related Articles Bias controlled capacitive driven cantilever oscillation for high resolution dynamic force microscopy Appl. Phys. Lett. 102, 073110 (2013) Friction measurement on free standing plates using atomic force microscopy Rev. Sci. Instrum. 84, 013702 (2013) A correlation force spectrometer for single molecule measurements under tensile load J. Appl. Phys. 113, 013503 (2013) Compact metal probes: A solution for atomic force microscopy based tip-enhanced Raman spectroscopy Rev. Sci. Instrum. 83, 123708 (2012) Note: Radiofrequency scanning probe microscopy using vertically oriented cantilevers Rev. Sci. Instrum. 83, 126103 (2012)
منابع مشابه
Dynamic proportional-integral-differential controller for high-speed atomic force microscopy
In tapping mode atomic force microscopy, the cantilever tip intermittently taps the sample as the tip scans over the surface. This mode is suitable for imaging fragile samples such as biological macromolecules, because vertical oscillation of the cantilever reduces lateral forces between the tip and sample. However, the tapping force vertical force is not necessarily weak enough for delicate sa...
متن کاملNumerical simulation of nano scanning in intermittent-contact mode AFM under Q control.
We investigate nano scanning in tapping mode atomic force microscopy (AFM) under quality (Q) control via numerical simulations performed in SIMULINK. We focus on the simulation of the whole scan process rather than the simulation of cantilever dynamics and the force interactions between the probe tip and the surface alone, as in most of the earlier numerical studies. This enables us to quantify...
متن کاملHigh-speed dynamic-mode atomic force microscopy imaging of polymers: an adaptive multiloop-mode approach
Adaptive multiloop-mode (AMLM) imaging to substantially increase (over an order of magnitude) the speed of tapping-mode (TM) imaging is tested and evaluated through imaging three largely different heterogeneous polymer samples in experiments. It has been demonstrated that AMLM imaging, through the combination of a suite of advanced control techniques, is promising to achieve high-speed dynamic-...
متن کاملSensitivity Analysis of Frequency Response of Atomic Force Microscopy in Liquid Environment on Cantilever's Geometrical Parameters
In this paper, the non-linear dynamic response of rectangular atomic force microscopy in tapping mode is considered. The effect of cantilever’s geometrical parameters (e.g., cantilever length, width, thickness, tip length and the angle between the cantilever and the sample's surface in liquid environment has been studied by taking into account the interaction forces. Results indicate that the r...
متن کاملFrequency and force modulation atomic force microscopy: low-impact tapping-mode imaging without bistability
Since the 1980s, atomic force microscopy (AFM) has rapidly developed into a versatile, high-resolution characterization technique, available in a variety of imaging modes. Within intermittent-contact tapping-mode, imaging bistability and sample mechanical damage continue to be two of the most important challenges faced daily by AFM users. Recently, a new double-control-loop tapping-mode imaging...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013