Boron Nitride Nanomesh

4. A. M. Morales, C. M. Lieber, Science 279, 208 (1998). 5. L. Manna, E. C. Scher, A. P. Alivisatos, J. Am. Chem. Soc. 122, 12700 (2000). 6. Y. Xia et al., Adv. Mater. 15, 353 (2003). 7. J. N. Cha, G. D. Stucky, D. E. Morse, T. J. Deming, Nature 403, 289 (2000). 8. J. D. Hartgerink, E. Beniash, S. I. Stupp, Science 294, 1684 (2001). 9. T. Douglas, M. Young, Nature 393, 152 (1998). 10. E. Dujardin et al., Nano Lett. 3, 413 (2003). 11. S.-W. Lee, C. Mao, C. E. Flynn, A. M. Belcher, Science 296, 892 (2002). 12. M. Reches, E. Gazit, Science 300, 625 (2003). 13. S. R. Whaley, D. S. English, E. L. Hu, P. F. Barbara, A. M. Belcher, Nature 405, 665 (2000). 14. C. Mao et al., Proc. Natl. Acad. Sci. U.S.A. 100, 6946 (2003). 15. J. F. Banfield, S. A. Welch, H. Zhang, T. T. Ebert, R. L. Penn, Science 289, 751 (2000). 16. A. P. Alivisatos, Science 289, 736 (2000). 17. C. Flynn, et al., J. Mater. Chem. 13, 2414 (2003). 18. B. D. Reiss et al., in preparation. 19. Single-letter abbreviations for the amino acid residues are as follows: A, Ala; C, Cys; D, Asp; E, Glu; F, Phe; G, Gly; H, His; I, Ile; K, Lys; L, Leu; M, Met; N, Asn; P, Pro; Q, Gln; R, Arg; S, Ser; T, Thr; V, Val; W, Trp; and Y, Tyr. 20. C. F. Barbas III et al., Phage Display, A Laboratory Manual (Cold Spring Harbor Laboratory Press, Cold Spring Harbor, NY, 2001). 21. C. Gao et al., Proc. Natl. Acad. Sci. U.S.A. 96, 6025 (1999). 22. P. Malik, R. N. Perham, Nucleic Acids Res. 25, 915 (1997). 23. K. Nam et al., Nano Lett., in press; published online 16 December 2003 (10.1021/nl0347536). 24. W. D. Luedtke, U. Landman, J. Phys. Chem. 100, 13323 (1996). 25. Annealing of the ZnS mineralized viruses for 3 hours on aminosilinized SiO2 wafers at 400° to 500°C, depending on particle size distribution, was followed by sonication in 1:1 water and ethanol. The suspension of annealed wires was drop coated onto TEM grids for visualization. Increasing the wetability of the substrates was necessary for the alignment of the virus assemblies. 26. Thermal gravimetric analysis was performed on the Perkin Elmer 200 thermogravimetric/differential thermal analysis, with flow gases consisting of air, argon, and forming gas (5% H2). Samples were prepared by centrifugation of the virus-particle suspension into 1-mg pellets and allowed to dry. 27. TEM samples were analyzed with the JEOL 2010 and 2010–Field Emission Gun (FEG) microscopes. HAADF analysis of the ZnS and CdS samples was performed on the JEOL 2010-FEG. Gantan Digital Micrograph is used to subtract the background of the HRTEM lattice images. Thermal analysis of the CoPt system was performed in situ on the JEOL 200CX microscope operated at 200 kV, with a Gatan heat stage. 28. S. B. Qadri et al., Phys. Rev. B 60, 9191 (1999). 29. X. Duan, C. M. Lieber, Adv. Mater. 12, 298 (2000). 30. C. Ye, G. Meng, Y. Wang, Z. Jiang, L. Zhang, J. Phys. Chem. B 106, 10338 (2002). 31. R. L. Penn, J. F. Banfield, Geochim. Cosmochim. Acta 63, 1549 (1999). 32. S. Sun, C. B. Murray, D. Weller, L. Folks, A. Moser, Science 287, 1989 (2000). 33. Y. H. Huang, H. Okumura, G. C. Hadjipanayis, D. Weller, J. Appl. Phys. 91, 6869 (2002). 34. CoPt wires were synthesized by the interaction of 1 ml of CoPt-specific viruses (1012 phage/ml) with 0.5 mM CoCl2 and 0.5 mM H2PtCl6 in a 1:1 ratio. In the case of FePt, 1 ml of phage (1012 phage/ml) was mixed with 0.01 mM FeCl2 and 0.01 mM H2PtCl6. These mixtures were vortexed for 10 min to ensure mixing, and 0.1 M NaBH4 was added to reduce the metals forming the desired nanoparticles. The CoPt and FePt systems were applied directly to SiO TEM grids and annealed under forming gas (5% H2) to prevent the onset of oxidation for 3 hours at 350°C. 35. K. Barmak et al., Appl. Phys. Lett. 80, 4268 (2002). 36. The virus assembly was reconstructed from the gP8 protein structure obtained from the Protein Data Bank (PDB) (number 1ifj) by application of the appropriate translation vectors. A random number generator was used to realistically incorporate peptide inserts in the gP8 assembly at a given incorporation percentage. The peptide inserts were modeled in the capsid environment with Monte Carlo software MCPRO (39) with solvent effects accounted for by the Poisson-Boltzmann toolkit ZAP (40). 37. H. Zhu, R. S. Averback, Philos. Mag. Lett. 73, 27 (1996). 38. M. Yeadon, M. Ghaly, J. C. Yang, R. S. Averback, J. M. Gibson, Appl. Phys. Lett. 73, 3208 (1998). 39. MCPRO, Version 1.68; W. L. Jorgensen, Yale University. 40. OpenEye Scientific Software, Cambridge, MA. 41. We thank C. Flynn for valuable discussion. We acknowledge the use of core microscope facilities in the Texas Materials Institute at UT and the Center for Materials Science and Engineering at MIT. Supported by NSF through the Nanotechnology and Interdisciplinary Research Initiative, the Army Research Office, and the Air Force Scientific Research Office.