Ultrasonic Inspection of Pressure Vessel Construction Welds using Phased Arrays

نویسنده

  • Michael Moles
چکیده

Ultrasonic phased arrays are a new technology that offers considerable potential for inspecting construction welds. Using electronic control of the beam, phased arrays can scan, sweep, steer and focus the ultrasound. Since welds typically produce defects of known character and orientation, phased arrays can be programmed to optimize weld inspections. These inspections include standard ASME-type pulse echo raster scans, zone discrimination, TOFD and “specials”, depending on the vessel, weld profile, geometry and specifications.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Ultrasonic Phased Arrays for the Inspection of Thick-Section Welds

Ultrasonic phased arrays will eventually replace conventional ultrasonic methods in many nondestructive evaluation (NDE) applications. However, the transition to phased arrays is not without its pitfalls and challenges. In this report we present a summary of the advantages and limitations of phased-array ultrasonics in NDE, with specific reference to the inspection of thicksection welds. The ma...

متن کامل

The Ultrasonic Phased Array Inspection Technology Used in Tubular Joint Welds of Offshore Platform Structures

Aimed at the practical requirement of tubular joint welds inspection of offshore platform structures, the ultrasonic phased array inspection algorithm for offshore platform structures is proposed in this paper, and the ultrasonic phased array inspection system for offshore platform structures is developed. The experiment of tubular joint model is performed with the ultrasonic phased array inspe...

متن کامل

Core Shroud Inspection Coverage and Inspection Time Improvements through Phased Array Technique and Manipulator Improvements

In December 2006, the Boiling Water Reactor Vessel and Internals Project (BWRVIP) issued a letter mandating two-sided coverage for the volumetric examination of BWR core shroud welds. In this letter, they noted that: “Ultrasonic flaw detection and sizing performance is degraded by stainless steel or nickel allow weld metal. The base metal examination volumes on both sides of the weld should be ...

متن کامل

Development of an automated scanner and phased array ultrasonic testing technique for the inspection of nozzle welds in the nuclear industry

Regular in-service inspection is important to verify the integrity of welded nozzle sections in the nuclear industry. Nozzle sections can be susceptible to crack growth due to thermal fatigue and stress corrosion. Early detection of cracks is therefore essential to ensure the continued safe operation of the facilities. In order to reduce the time and cost of such inspections there is a need to ...

متن کامل

Curved Arrays for Improved Inspection of Small Pipe Welds

This paper describes computer modeling and testing of phased arrays curved in the passive axis to improve focusing on small diameter pipe welds; in practice, a couple of curvatures satisfy most diameter and wall thickness applications. The modeling was followed by experimental testing using one of the curved arrays. Not surprisingly, the curved array showed significant improvements over a flat ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2005