Effects of carbon blacks with various structures on vulcanization and reinforcement of filled ethylene-propylene-diene rubber
نویسندگان
چکیده
The effects of carbon blacks on vulcanization and mechanical properties of filled ethylene-propylene-diene rubber (EPDM) are investigated, by comparing with five types of rubber-grade carbon blacks. Curing kinetics is studied by rheometer and the results indicate that the curing characteristics are influenced by combination of surface area of carbon black and sulphur content on the filler surface, because the former one enhances the physical cross-linking and the latter one introduces the additional chemical cross-linking. Both the degree of cross-linking and cure rate increase with increasing surface area and sulphur content, whereas the optimum cure time and scorch time decrease. The reinforcing nature of the carbon black is assessed from mechanical measurements. It is suggested that the surface area of carbon blacks strongly affects the physical properties of EPDM/carbon black composites. Conductive carbon black (N472) can be used as desirable reinforcing filler due to the higher degree of cross-linking of EPDM with N472 than other EPDM/carbon black composites. The morphology and distribution of particles are studied by using scanning electron microscope. The sound reinforcing ability of N472 is also supported by scanning electron microscope due to the notable dispersibility of N472 within EPDM matrix. N472 ensures the EPDM/N472 composite the most conductive sample among the five composites.
منابع مشابه
Experimental Identification of Viscoelastic Properties of Rubber Blends by Means of a Torsional Rheometer
The dimensioning of injection heads for the extrusion of rubber profiles is exclusively based on empiric knowledge of the non-linear flow behaviour of elastomers. The swelling of the extrudate when emerging from a capillary is typical for viscoelastic fluids, such as polymers and rubber blends, respectively. Therefore, the experimental investigation and numerical treatment of this swelling beha...
متن کاملAn Integrated AHP-PROMETHEE Method for Selecting the most Suitable Ethylene Propylene Diene Termonomer
This paper considers the problem of selecting the most appropriate ethylene propylene diene monomer (EPDM), which is a polyolefin with a variety of usages in different areas. The metallocene catalyst, bis(2-phenyl indenyl) zirconium dichloride ((2-PhInd)2ZrCl2) was synthesized by a modified method and applied to the terpolymerization of ethylene, propylene, and 5-ethylidiene-2-norbornene (ENB)....
متن کاملEffect of multi-walled carbon nanotube on mechanical and rheological properties of silane modified EPDM rubber
A novel mixing approach for achieving a good dispersion of multi-walled carbon nanotubes (MWCNTs) in ethylene- propylene diene monomer (EPDM) matrix has been investigated. In this approach EPDM was modified with vinyltrimethoxysilane (VTMS) during melt mixing. In addition the effect of MWCNT concentration on mechanical and rheological properties of modified EPDM has been studied. The formulated...
متن کاملMechanical, Thermal, Electrical and Morphology Characterization of Ethylene Propylene Diene Monomer - Nanoclay Composites
The effect of nanoclay in combination with other inter fillers in ethylene propylene diene monomer (EPDM) rubber vulcanizate were studied. Curing characteristics were carried out using rubber process analyzer (RPA). Mechanical, thermal and morphology characterization of EPDM nanoclay composites were studied.
متن کاملAntibacterial ethylene propylene rubber impregnated with silver nanopowder: AgNP@EPR
Following our interest in reaching for a molded rubber article with possible detergent contact applications, durable silver nanopowder (AgNP) is synthesized by arc discharge, then mixed with varying ratios of ethylene propylene rubber (EPR), affording novel AgNP@EPR nanocomposites. X-ray diffraction (XRD) patterns of AgNP as well as AgNP@EPR show no trace of impurity, while scanning electron mi...
متن کامل