Note on the Lift Slope, and some other Properties, of Delta and Swept-back Wings
نویسنده
چکیده
منابع مشابه
Flutter Analysis of a Low Aspect Ratio Swept- Back Trapezoidal Wing at Low Subsonic Flow
A linear, aeroelastic analysis of a low aspect ratio swept back trapezoidal wing modeled as a cantilever plate is presented. An analytical and numerical formulation for both the aerodynamic forcing and structural response of the wing was developed. The analytical model uses a three dimensional time domain vortex lattice aerodynamic method. A Rayleigh-Ritz approach has been used to transfer equa...
متن کاملExperimental Investigation of Asymmetry of Vortex Flow Over Single Delta Wings
It is generally believed that, on slender delta wings, there is a critical state at which strong asymmetric vortices are found along the leading edge on the lee-side of the delta wing. These asymmetric vortices can lead to high lateral forces even when slender delta wing is at the zero angle of yaw. Some experimental studies reported recently, cast considerable doubt as to the validity of the a...
متن کاملSome Simple Conical Camber Shapes to produce Low Lift-Dependent Drag on a Slender Delta Wing
ROYAL AIRCRAFT ESTABLISHMENT Some simple conical c~mbcr shapes to produce low lift-depend,cnt drag on a slender delta wing G. G. Brebner This note presents some of the theoretical aerodynamic characteristics of narrow delta wings having flat csntre portions and two types of simple conical camber designed to produce zero load at the leading edge at the design C,.,. Slender wing theory is used in...
متن کاملVortical Flow Management for Improve!/ Configuration Aerodynamics - Recent Expert«
-Hh1s paper reports recent progress 1n vortex-control applications for alleviating the adverse consequences of three-dimensional separation and vortical Interactions on slender body/swept wing configurations. Examples Include: helical separation trip to alleviate the side force due to forebody vortex asymmetry; hinged strakes to avoid vortex breakdown effects; compartmentatlon ... swept leading...
متن کاملBack analysis of inter-ramp slope failure in Teghout copper mine
Slope stability is one of the most important issues in open pit mining design. The main purpose of any open pit mine design is to propose an optimal excavation configuration, considering safety, ore recovery and financial return. An accurate pit slope design which accounts for the mine geology, structural geology, rock mass properties, and hydrogeology models of the mine area, drastically enhan...
متن کامل