Identification of Optimum Location of STATCOM in Transmission Line Employing RCGA Optimization Technique
نویسنده
چکیده
This study inspects the optimum location of STATCOM device in long transmission line to acquire the maximum power system transient stability improvement. STATCOM is a kind of prominent and effective shunt FACTS device which is used in power system to enhance the power system stability and to regulate the line voltage. When it has been placed at the center point of a transmission line, play a key role in controlling the reactive power flow and enhancing the power system transient stability. The active power losses caused by transmission line resistance alter the neutral position or optimum location of STATCOM in transmission line. RCGA optimization due to have high ability to solve non-linear objective function has been implanted to identify the optimum location of STATCOM. The results of non-linear simulation under severe disturbance approve that the optimum location of STATCOM in order to access the maximum power system transient stability by reducing the active power losses approaches to midpoint of transmission line.
منابع مشابه
Fault Analysis of Double Line Transmission System with STATCOM Controller Using Neuro-Wavelet Based Technique
The STATCOM (Synchronous Static Compensator) based on voltage source converter (VSC) is used for voltage regulation in transmission and distribution systems. The STATCOM can rapidly supply dynamic VARs required during system faults for voltage support. The apparent impedance is influenced by the reactive power injected or absorbed by the STATCOM, which will result in the under reaching or over ...
متن کاملOptimal location of STATCOM using chemical reaction optimization for reactive power dispatch problem
Flexible AC transmission system; Static synchronous compensator (STATCOM); Optimal reactive power dispatch (ORPD); Chemical reaction optimization (CRO); Transmission loss Abstract Optimal reactive power dispatch (ORPD) problem has a significant influence on optimal operation of power systems. However, getting optimal solution of ORPD problem is a strenuous task for the researchers. The inclusio...
متن کاملSTATCOM Optimal Allocation in Transmission Grids Considering Contingency Analysis in OPF Using BF-PSO Algorithm
In this paper, a combinational optimization algorithm is introduced to obtain the best size and location of Static Compensator (STATCOM) in power systems. Its main contribution is considering contingency analysis where lines outages may lead to infeasible solutions especially at peak loads and it commonly can be vanished by load-shedding. The objective of the proposed algorithm is firstly to pr...
متن کاملImpedance-Based Out-of-Step Protection of Generator in the Presence of STATCOM
This paper presents a novel impedance-based approach for out-of-step (OOS) protection of a synchronous generator. The most popular and commonly used approaches for detecting OOS conditions are based on the measurement of positive sequence impedance at relay location. However, FACTS devices change the measured impedance value and thus disrupt the performance of impedance-based relay function. In...
متن کاملOPTIMUM PLACEMENT AND PROPERTIES OF TUNED MASS DAMPERS USING HYBRID GENETIC ALGORITHMS
Tuned mass dampers (TMDs) systems are one of the vibration controlled devices used to reduce the response of buildings subject to lateral loadings such as wind and earthquake loadings. Although TMDs system has received much attention from researchers due to their simplicity, the optimization of properties and placement of TMDs is a challenging task. Most research studies consider optimization o...
متن کامل