Femtosecond laser modification of an array of vertically aligned carbon nanotubes intercalated with Fe phase nanoparticles
نویسندگان
چکیده
Femtosecond lasers (FSL) are playing an increasingly important role in materials research, characterization, and modification. Due to an extremely short pulse width, interactions of FSL irradiation with solid surfaces attract special interest, and a number of unusual phenomena resulted in the formation of new materials are expected. Here, we report on a new nanostructure observed after the interaction of FSL irradiation with arrays of vertically aligned carbon nanotubes (CNTs) intercalated with iron phase catalyst nanoparticles. It was revealed that the FSL laser ablation transforms the topmost layer of CNT array into iron phase nanospheres (40 to 680 nm in diameter) located at the tip of the CNT bundles of conical shape. Besides, the smaller nanospheres (10 to 30 nm in diameter) are found to be beaded at the sides of these bundles. Some of the larger nanospheres are encapsulated into carbon shells, which sometime are found to contain CNTs. The mechanism of creation of such nanostructures is proposed.
منابع مشابه
Optimized Conditions for Catalytic Chemical Vapor Deposition of Vertically Aligned Carbon Nanotubes
Here, we have synthesized vertically aligned carbon nanotubes (VA-CNTs), using chemical vapor deposition (CVD) method. Cobalt and ethanol are used as the catalyst and the carbon source, respectively. The effects of ethanol flow rate, thickness of Co catalyst film, and growth time on the properties of the carbon nanotube growth are investigated. The results show that the flow rate of ethanol and...
متن کاملLaser-assisted simultaneous transfer and patterning of vertically aligned carbon nanotube arrays on polymer substrates for flexible devices.
We demonstrate a laser-assisted dry transfer technique for assembling patterns of vertically aligned carbon nanotube arrays on a flexible polymeric substrate. A laser beam is applied to the interface of a nanotube array and a polycarbonate sheet in contact with one another. The absorbed laser heat promotes nanotube adhesion to the polymer in the irradiated regions and enables selective pattern ...
متن کاملControlled growth and modification of vertically-aligned carbon nanotubes for multifunctional applications
Vertically-aligned carbon nanotubes possess many advantages for a wide range of multifunctional applications. Along with the controlled growth of aligned/micropatterned carbon nanotubes, surface modification of vertically-aligned carbon nanotubes are essential in order to meet specific requirements demanded for particular applications. While many innovative synthetic methods have been developed...
متن کاملA Forest of Sub-1.5-nm-wide Single-Walled Carbon Nanotubes over an Engineered Alumina Support
A precise control of the dimension of carbon nanotubes (CNTs) in their vertical array could enable many promising applications in various fields. Here, we demonstrate the growth of vertically aligned, single-walled CNTs (VA-SWCNTs) with diameters in the sub-1.5-nm range (0.98 ± 0.24 nm), by engineering a catalyst support layer of alumina via thermal annealing followed by ion beam treatment. We ...
متن کاملReactor Design for Low-Temperature Growth of Vertically Aligned Carbon Nanotubes
This paper reports on the design of novel reactor for low-temperature growth of Vertically Aligned Carbon Nanotubes (VACNTs). Two mechanisms for selective heating catalytic nanoparticles were investigated: (i) a heating from exothermic reaction of catalytic oxidation and (ii) an induction heating. The requirements for efficient induction heating catalytic particles of size varying from micron t...
متن کامل