Stabilization of Potentially Sticky Substances in Pulp Mill Process Water with Polysaccharides
نویسندگان
چکیده
Characterization of the dissolved and colloidal substances (DCS) in the process water of a bleached chemithermomechanical pulp (BCTMP) production line showed that the major lipophilic substances (wood resins) were dehydroabietic acid, linoleic acid, oleic acid, and palmitic acid. Model compound experiments indicated that polysaccharides contained in DCS had significant effects on the stability of the system. Effects of neutral and acidic polysaccharides on the stability of wood resins (model resin acid R and fatty acid O) in the presence of metal ions were then investigated. No calcium-induced aggregation occurred when the concentration ratio of added neutral polysaccharide to R and O exceeded 0.2 and 1.0, respectively. Acidic polysaccharide could further degrade the stability of resin dispersions in the presence of calcium ions and yet have a positive effect in the presence of only sodium ions.
منابع مشابه
Effect of Metal Salt Coagulants on Treatment of Activated Sludge Effluent in Sulfite Mill Pulp and Paper Plant
Pulp and paper effluents are considered as serious environmental hazards and their treatment, because of multiplicity of impurities and complexity of their chemical structures, is one of the most difficult and inconvenient industrial processes. As the most pulp and paper mill work on kraft process, there are few studies in literature on the treatment of neural sulfite semi chemical (NSSC) p...
متن کاملImpact of pulp and paper mill effluent on physico-chemical properties of soil
Water requirement to meet agriculture, domestic, industrial and other demands indicate the need for regeneration of waste water. Industrial waste water is being used in dry areas. Waste water of pulp and paper industry (brown with unpleasant smell) is usually alkaline in nature, has high suspended solids, total solids, COD, BOD and toxic odorous substances. It was observed in the study areas th...
متن کاملEffect of Heat-dispersing on Stickies and Their Removal in Post-flotation
The effect of heat-dispersing on sticky substances in a deinking pulping line was studied under different conditions including varying temperature, disc clearance, and pulp consistency. Sticky substances were quantitatively investigated before and after the heat-dispersing, and categorized into macro-, mini-, and micro-stickies as well as dissolved and colloidal substances. Meanwhile, their ext...
متن کاملProcess Simulation for Water Consumption Minimization in Pulp Mill
−− Reducing the use of fresh water can lead to energy savings when this is properly planned and executed. Chemical process simulation has proven to be an effective tool for performing a global analysis of water systems to identify routes for maximizing the process efficiency concerning to water recovery. System closure has been introduces in pulp mills resulting in simultaneous buildup of nonpr...
متن کاملEvaluation of Net Energy Obtainable from Combustion of Stabilised Olive Mill By-Products
This work is aimed at calculating the energy content of the residues from olive oil production. Olive pulp, olive husk and sludge (a mixture of olive pulp and husk) have been analyzed separately. Olive Mill Effluents (OME) are normally a problem for olive mill farms, yet they may be used as feedstock for biomass-fuelled power plants. Nonetheless, OMEs are characterized by a relatively high humi...
متن کامل