NUMERICAL SIMULATION OF RING ROLLING PROCESS FOR Ni-BASE ARTICLES
نویسندگان
چکیده
Continuous improvements of properties for individual parts are indispensable for perpetual development of aircraft engines. Concerning casing and seal, simulation of ring rolling process is one of the most attractive tools to reduce the cost and time and to improve the properties and the reliability at the same time. In order to obtain both practical prediction accuracy and acceptable computation time from industrial standpoint, the refined partial three-dimensional deformation model was proposed. Moreover the relationship between microstructure evolution and various parameters regarding to Waspaloy* was evaluated and microstructure prediction models were developed. Constructed microstructure prediction models were coupled to the finite element analyzing system to estimate mean grain diameter and fraction of recrystallization in addition to general output e.g. temperature, strain. The effectiveness of proposed prediction system as a process design tool was confirmed through multi compression test and production of actual casing that had extremely complicated near-net-shape.
منابع مشابه
Evaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading
The defect in work rolls directly influence the forming cost and the final shape of the product. The researchers tend to investigate the thermo-mechanical stress in work roll of rolling machines. These stresses may reduce the roll life. Since the investigation of the thermo-mechanical stress in work roll with real-conditions is complex, comprehensive studies by means of numerical methods are av...
متن کاملSimulation of Cold Rolling Process Using Smoothed Particle Hydrodynamics (SPH)
Regarding the reported capabilities and the simplifications of the smoothed particle hydrodynamics (SPH) method, as a mesh-free technique in numerical simulations of the deformation processes, a 2-D approach on cold rolling process was provided. Using and examining SPH on rolling process not only caused some minor developments on SPH techniques but revealed some physical realities. The chosen t...
متن کاملPrediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms
Developing artificial neural network (ANN), a model to make a correct prediction of required force and torque in ring rolling process is developed for the first time. Moreover, an optimal state of process for specific range of input parameters is obtained using Genetic Algorithm (GA) and Particle Swarm Optimization (PSO) methods. Radii of main roll and mandrel, rotational speed of main roll, pr...
متن کاملNumerical Simulation of the Effect of Elastic Deformation of work rolls on the rolling force and Comparison with the Results obtained by the Slab Method during the reciprocating cold rolling
Cold rolling process of a major transformation in the form of sheet metal and a wide range of steel products are produced in this way. Elastic deformation during cold rolling working rollers and the inevitable increase in the rolling force. In this study, the effect of elastic deformation during cold rolling mill rollers working on the reciprocating back and forth in tandem with the presence of...
متن کاملNumerical Simulation of the Effect of Elastic Deformation of work rolls on the rolling force and Comparison with the Results obtained by the Slab Method during the reciprocating cold rolling
Cold rolling process of a major transformation in the form of sheet metal and a wide range of steel products are produced in this way. Elastic deformation during cold rolling working rollers and the inevitable increase in the rolling force. In this study, the effect of elastic deformation during cold rolling mill rollers working on the reciprocating back and forth in tandem with the presence of...
متن کامل