Sensitivity analysis of dendritic growth kinetics in a Bridgman furnace front tracking model

A directional solidification experiment of a Ti–Al–Nb–B–C alloy by power down method is simulated using a Bridgman furnace front tracking model. The effect of varying the dendritic growth parameters; C, the columnar dendrite growth coefficient, and n, the undercooling exponent, is investigated. A matrix of growth coefficients and undercooling exponents at three levels each, based around a growth law for Ti–46wt.%Al is applied in simulations, and the effect on columnar dendrite tip temperature, tip velocity, and tip temperature gradient is observed. The simulation results show that the dendrite tip velocity and temperature gradient at the tip are practically unaffected by the use of different growth parameters. However, the predicted columnar dendrite tip undercooling did vary to give the required dendrite tip velocity. This finding has implications for the analysis of microstructural transitions, such as the Columnar to Equiaxed Transition (CET). In conclusion, it is suggested that, for transient solidification conditions, a CET prediction criterion based on tip undercooling is preferable to one that uses growth velocity.