The effect of posture on the role of the apophysial joints in resisting intervertebral compressive forces.

نویسندگان

  • M A Adams
  • W C Hutton
چکیده

Cadaveric lumbar intervertebral joints were loaded to simulate the erect standing posture (lordosis), and the erect sitting posture (slightly flexed). The results show that, after the intervertebral disc has been reduced in height by a period of sustained loading, the apophysial joints resist about 16 per cent of the intervertebral compressive forces in the erect standing posture, whereas in the erect sitting posture they resist none. The implications of this in relationship to degenerative changes and to low backache are discussed.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The mutual effect of navicular drop and the type of foot covering on the contact forces of ankle and knee joints during running

Introduction: One of the best interventions in the field of reducing injury and improving performance is running shoes. Despite this, the research results show that achieving the desired result due to using shoes depends on paying attention to other influencing factors such as foot structure. Therefore, the present study was carried out with the aim of investigating the mutual effect of navicul...

متن کامل

Estimation of spinal loads using a detailed finite element model of the L4-L5 lumbar segment derived by medical imaging kinematics; a feasibility study

Introduction: Low back pain is the most prevalent orthopedic disorder and the first main cause of poor working functionality in developed as wells as many developing countries. In Absence of noninvasive in vivo measurement approaches, biomechanical models are used to estimate mechanical loads on human joints during physical activities. To estimate joint loads via musculoskelet...

متن کامل

A numerical analysis of effect of segmental lining joints on tunnel support internal forces under seismic loading

During an earthquake, the better performance of segmental tunnel lining, compared to the continuous in-cast concrete lining, is generally related to the joints between segments. In order to better understand the influence of the segment joints, their effect on the internal forces induced in tunnel lining simultaneously with the effects of the other influential parameters should be considered. I...

متن کامل

Micro-modeling of Masonry Infilled RC Moment Resisting Frames to Investigate Arrangement of Compressive Diagonal Struts

Accurate modeling of masonry has been a major concern of the researchers in the past decades. Besides reinforced and unreinforced masonry structures, masonry can be found in frame structures as infill panels which are used as partitions and/or external walls. These elements role as a part of structure and introduce a large degree of nonlinearity into the system. In this study, a micro-modeling ...

متن کامل

Effect of segmental joint stiffness on tunnel lining internal forces under static conditions

According to the wide application of segmental lining in mechanized tunneling, recognizing the behavior of segmental lining joints is important in tunnels designing. In the structural analysis of the tunnel segmental lining, segmental joints can be considered as elastic joints, and their stiffness characteristics are affected by the rotational, shear, and axial stiffness. The purpose of this wo...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • The Journal of bone and joint surgery. British volume

دوره 62 3  شماره 

صفحات  -

تاریخ انتشار 1980