Optical Property Analysis of Thermally and Photolytically Aged Eucalyptus Camaldulensis Chemithermomechanical Pulp (ctmp)

نویسندگان

  • Yao Chen
  • Yongming Fan
  • Mandla A. Tshabalala
  • Nicole M. Stark
  • Jianmin Gao
  • Ruijie Liu
چکیده

To investigate the optical properties of chemithermomechanical pulp (CTMP) from Eucalyptus camaldulensis, one group of samples of CTMP was aged by heating, and another group was first subjected to bleaching with different bleaching agents, and then aging by exposure to sunlight. Chromophores were analyzed using diffuse reflectance UV-Vis spectra (DRUV), and the brightness and color parameters (L, a, b) were analyzed using colorimetry. Results showed that the color reactions of the pulp, upon heating, were enhanced in the presence of moisture. There was a linear relationship between the pulp initial moisture content (MC) and the intensity of UV-Vis absorption. The contribution of different chromophores to pulp color was analyzed with the help of bleaching agents: hydrogen peroxide, sodium dithionite, and sodium borohydride. Sodium borohydride and hydrogen peroxide treatments resulted in a decrease in the absorption band at 280 nm along with the shoulder near 320 nm, which could be attributed to conjugated C=O and C=C systems. Similarly, sodium dithionite treatment also led to a decrease in absorption of the carbonyls and double bonds conjugated with aromatic double bonds. The chromaticity parameters of bleached pulp increased after exposure to sunlight. A correspondingly higher concentration of quinoid structures was found.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Bio-modification of Eucalyptus Chemithermo- Mechanical Pulp with Different White-rot Fungi

Modification of chemithermomechanical pulp (CTMP) by fungal treatment was investigated. Eucalyptus CTMP was treated with three different types of white-rot fungi, namely, Phanerochaete chrysosporium (P.c1767), Trametes hirsute 19-6 (T.h-19-6), and Trametes hirsute19-6w (T.h-19-6w), under a stationary culture condition. Pulp total weight loss, lignin loss, and cellulose loss were determined to c...

متن کامل

Suitability of Rapeseed Chemithermomechanical Pulp as Raw Material in Papermaking

The use of chemithermomechanical (CTMP) pulp from rapeseed residues as raw material for the manufacturing of linerboard and fluting medium grades was investigated. For this purpose, different alternatives for improving mechanical and optical properties of rapeseed CTMP were studied, and the addition of nanofibrillated cellulose (NFC) was proposed to decrease the intensity of the beating process...

متن کامل

Bioconversion of Waste Fiber Sludge to Bacterial Nanocellulose and Use for Reinforcement of CTMP Paper Sheets

Utilization of bacterial nanocellulose (BNC) for large-scale applications is restricted by low productivity in static cultures and by the high cost of the medium. Fiber sludge, a waste stream from pulp and paper mills, was enzymatically hydrolyzed to sugar, which was used for the production of BNC by the submerged cultivation of Komagataeibacter xylinus. Compared with a synthetic glucose-based ...

متن کامل

Barley Straw (Hordeum vulgare) as a Supplementary Raw Material for Eucalyptus camaldulensis and Pinus sylvestris Kraft Pulp in the Paper Industry

The present study shows that barley straw (Hordeum vulgare) can be a supplementary raw material of softwoods and hardwoods such as Pinus sylvestris and Eucalyptus camaldulensis, respectively, for the production of cellulose and paper, reducing an agricultural residue that has no added value. Barley straw has a lower content of cellulose at 36.4% than P. sylvestris and E. camaldulensis, but it c...

متن کامل

Oil spills abatement: factors affecting oil uptake by cellulosic fibers.

Wood-derived cellulosic fibers prepared in different ways were successfully employed to absorb simulated crude oil, demonstrating their possible use as absorbents in the case of oil spills. When dry fibers were used, the highest sorption capacity (six parts of oil per unit mass of fiber) was shown by bleached softwood kraft fibers, compared to hardwood bleached kraft and softwood chemithermomec...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012