The constrained gravity model with power function as a cost function
نویسندگان
چکیده
A gravity model for trip distribution describes the number of trips between two zones, as a product of three factors, one of the factors is separation or deterrence factor. The deterrence factor is usually a decreasing function of the generalized cost of traveling between the zones, where generalized cost is usually some combination of the travel, the distance traveled, and the actual monetary costs. If the deterrence factor is of the power form and if the total number of origins and destination in each zone is known, then the resulting trip matrix depends solely on parameter, which is generally estimated from data. In this paper, it is shown that as parameter tends to infinity, the trip matrix tends to a limit in which the total cost of trips is the least possible allowed by the given origin and destination totals. If the transportation problem has many cost-minimizing solutions, then it is shown that the limit is one particular solution in which each nonzero flow from an origin to a destination is a product of two strictly positive factors, one associated with the origin and other with the destination. A numerical example is given to illustrate the problem.
منابع مشابه
Inversion of Gravity Data by Constrained Nonlinear Optimization based on nonlinear Programming Techniques for Mapping Bedrock Topography
A constrained nonlinear optimization method based on nonlinear programming techniques has been applied to map geometry of bedrock of sedimentary basins by inversion of gravity anomaly data. In the inversion, the applying model is a 2-D model that is composed of a set of juxtaposed prisms whose lower depths have been considered as unknown model parameters. The applied inversion method is a nonli...
متن کاملA Multi-Mode Resource-Constrained Optimization of Time-Cost Trade-off Problems in Project Scheduling Using a Genetic Algorithm
In this paper, we present a genetic algorithm (GA) for optimization of a multi-mode resource constrained time cost trade off (MRCTCT) problem. The proposed GA, each activity has several operational modes and each mode identifies a possible executive time and cost of the activity. Beyond earlier studies on time-cost trade-off problem, in MRCTCT problem, resource requirements of each execution mo...
متن کاملJoint pricing and production management: a geometric programming approach with consideration of cubic production cost function
Coordination and harmony between different departments of a company can be an important factor in achieving competitive advantage if the company corrects alignment between strategies of different departments. This paper presents an integrated decision model based on recent advances of geometric programming technique. The demand of a product considers as a power function of factors such as produ...
متن کاملEstimating the Parameters in Photovoltaic Modules: A Constrained Optimization Approach
This paper presents a novel identification technique for estimation of unknown parameters in photovoltaic (PV) systems. A single diode model is considered for the PV system, which consists of five unknown parameters. Using information of standard test condition (STC), three unknown parameters are written as functions of the other two parameters in a reduced model. An objective function and ...
متن کاملAn integrated production-marketing planning model With Cubic production cost function and imperfect production process
The basic assumption in the traditional inventory model is that all outputs are perfect items. However, this assumption is too simplistic in the most real-life situations due to a natural phenomenon in a production process. From this it is deduced that the system produces non-perfects items which can be classified into four groups of perfect, imperfect, reworkable defective and non-reworkable d...
متن کاملVoltage Stability Constrained OPF Using A Bilevel Programming Technique
This paper presents a voltage stability constrained optimal power flow that is expressed via a bilevel programming framework. The inner objective function is dedicated for maximizing voltage stability margin while the outer objective function is focused on minimization of total production cost of thermal units. The original two stage problem is converted to a single level optimization problem v...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- JAMDS
دوره 2006 شماره
صفحات -
تاریخ انتشار 2006