Thermal Stress in Bonded Joints
نویسنده
چکیده
This paper considers the stress distributions in bonded materials induced by differential expansion or contraction of these materials. The analytical approach is similar to the lap joint theories attributed to Volkersen and expanded by Goland and Reissner. Several simple and typical analytical models are presented to bring out the relative importance of dlrerent geometrical and material parameters and to give some insight into different modes in which the bonds might fail.
منابع مشابه
Thermal Residual Stress Analysis of Epoxy Bimaterial Laminates and Bonded Joints
Finite element analysis (FEA) and continuum mechanics techniques have been used to model the thermal residual stress distribution in bonded joints and assess the suitability of using two-dimensional (2D) analysis methods. The methods are first employed to investigate stresses in metal-epoxy bi-material strip samples. The change in curvature of two bi-material strip systems during heating and co...
متن کاملInvestigation on the Effect of Tigthening Torque on the Stress Distribution in Double Lap Simple Bolted and Hybrid (Bolted -Bonded) Joints
In this research, the effects of torque tightening on the stress distribution in double lap simple bolted and hybrid (bolted-bonded) joints have been investigated numerically. In order to determine the bolt clamping force value due to tightening torque in simple bolted and hybrid joints, which is necessary in numerical simulation, an experimental approach has been proposed. To do so, two kinds ...
متن کاملAnalytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings
In this paper, considering an adhesively bonded composite single-lap joint, a novel approach is presented to predict the peel and shear stress distributions of the adhesive layer for an ASTM standard test sample. In current method, the equilibrium equations are derived using the energy method and based on the Timoshenko’s beam theory. Two solution procedures then are discussed, one of which rep...
متن کاملViscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model
In this study, shear and peel stress distributions in the viscoelastic adhesive layer of a single-lap joint (SLJ) with functionally graded (FG) adherends are investigated. The study focuses on the effect of different adherend profiles and material composition on the time-dependent stress concentration/distribution in balanced and unbalanced SLJs. For this purpose, the Reddy model is applied to ...
متن کاملSimulations of thermoelastic triangular cell lattices with bonded joints by finite element analysis
Thermoelastic triangular cell lattices composed of bi-material curved ribs were designed and analyzed by finite element simulation. Positive, negative, or zero thermal expansion was possible by varying rib curvature if joints can pivot freely, as expected. Welded or bonded joints result in nonzero expansion but smaller in magnitude than that of a constituent material having higher thermal expan...
متن کامل