The Influence of Solid Additives on the Tribological Properties of Lubricants
نویسندگان
چکیده
منابع مشابه
Effect of Substrate Bias Voltage and Ti Doping on the Tribological Properties of DC Magnetron Sputtered MoSx Coatings
Molybdenum disulfide (MoS2) is one of the most widely used solid lubricants. In this work, composite MoSx/Ti coatings were deposited by direct-current magnetron sputter ion plating onto plain carbon steel substrates. The MoSx/Ti ratio in the coatings was controlled by sputtering the composite targets. The composition, microstructure, and mechanical properties of the coatings were explored using...
متن کاملTribological behavior of sputter-deposited MoSX/Ni coatings
AbstractSputtered MoS2 coatings have been mostly used as a solid lubricant. In this investigation, MoSx/Ni composite coatings with Ni contents varying from 0 to 22 % were deposited onto steel substrate using a DC magnetron sputter process. The MoS2/Ni ratio in the coatings was controlled by sputtering the composite targets. The composition, microstructure, and mechanical properties of the...
متن کاملAlkyl Polyglucosides as Components of Water Based Lubricants
Water can be used as an ecological lubricant base if it is possible to select additives which can beneficially modify its tribological and corrosion properties. Additionally, those additives should not be harmful to human health and the natural environment. These conditions limit or even eliminate the possibility for the application of the additives used in traditional oil bases as they are ins...
متن کاملTribological characteristics of amine phosphate and octylated/butylated diphenylamine additives infused bio-lubricant
This paper presents the experimental results of normal lubricant, additives added lubricants and waste vegetable oil (WVO) contaminated bio-lubricants to evaluate the tribological properties such that friction and wear characteristics. The test was conducted using a four-ball tribotester with standard test method IP239. The balls used in four-ball tribotester were based on carbon-chromium steel...
متن کاملTribological behavior of vegetable oil-based lubricants with nanoparticles of oxides in boundary lubrication conditions
This work studied the development of vegetable based lubricants and the addition of oxides nanoparticles (ZnO and CuO) as additive for extreme pressure (EP), exploring the EP and oil base influence in tribological behavior. The results showed that with the addition of nanoparticles to conventional lubricant, the tribological properties can be significantly improved. A smoother and more compact ...
متن کامل