Investigating the Effect of Brass Electrode on Inconel 718 on Electrical Discharge Machine
نویسندگان
چکیده
Electrical Discharge Machine (EDM) parameters have a significant influence on machining characteristic like material removal rate (MMR) and tool wear rate (TWR). Inconel 718, which is widely used in the Medical, Marine, Architectural and food processing industries, is used as a work material. The tool electrode materials used are brass. Experiments are conducted using face centered central composite design.
منابع مشابه
An empirical study on statistical analysis and optimization of EDM process parameters for inconel 718 super alloy using D-optimal approach and genetic algorithm
Among the several non-conventional processes, electrical discharge machining (EDM) is the most widely and successfully applied for the machining of conductive parts. In this technique, the tool has no mechanical contact with the work piece and also the hardness of work piece has no effect on the machining pace. Hence, this technique could be employed to machine hard materials such as super allo...
متن کاملInvestigation of Electric Discharge Machining of Inconel 718 Using Special Graphite Electrode
Electric Discharge Machining is a non-conventional machining process, used to machining difficult to machine materials. The major problem faced while doing EDM is high tool wear rate, end wear, corner wear , surface roughness and low material removal rate,. In this research work experimental investigations have been made to find the machining characteristics of high density ultra fine graphite ...
متن کاملTechnological Innovations in Machining of Inconel 718: A State of the Art
In this paper, a thorough review has been presented on the latest research work carried out for the enhancement of machining performance of one of the most commonly used superalloys that is, Inconel 718. The thermal energy has been frequently utilized for improving machinability characteristics of Inconel 718. The review of available literature indicates that plasma, laser, and electric dischar...
متن کاملOptimization of machining parameters of EDM while machining Inconel 718 for form tolerance and orientation tolerance
This paper demonstrates the effectiveness of optimizing multiple characteristics of electrical discharge machining (EDM) of Inconel 718 using copper electrodes having different shapes via Taguchi method-based Grey analysis. The modified algorithm adopted here is used successfully for both detraining the optimum settings of machining parameters and for combining multiple quality characteristic i...
متن کاملExperimental Investigation of Surface Roughness and Kerf Width During Machining of Blanking Die Material on Wire Electric Discharge Machine
Wire electric discharge machine (WEDM) is spark erosion in unconventional machining technique to cut hard and the conductive material with a wire as an electrode. The blanking die material SKD 11 is a high carbon and high chromium tool steel with high hardness and high wearing resistance property. This tool steel has broad application in press tools and dies making industries. In this research ...
متن کامل