Studying and Improving Blast Furnace Cast Iron Quality
نویسنده
چکیده
Т. K. Balgabekov, D. K. Issin, A. Z. Issagulov, A. Z. Akashev, Zh. D. Zholdubayeva Karaganda State Technical University, Karaganda, Kazakhstan B. M. Kimanov, Zh. Abishev Chemical-Metallurgical Institute, Karaganda, Kazakhstan B. D. Issin, Tomskij politehnicheskij university, Tomsk, Rossia In the article there are presented the results of studies to improve the quality of blast furnace cast iron. It was established that using fire clay suspension for increasing the mould covering heat conductivity improves significantly pig iron salable condition and filtration refining method decreases iron contamination by nonmetallic inclusions by 50 – 70 %.
منابع مشابه
Optimization of an Automatic Blast Furnace through Integrated Simulation Modeling
The objective of this study was to develop an integrated simulation model of an automatic blast furnace in a full-scale steelmaking factory. The integrated simulation model introduces a set of optimizing alternatives through sensitivity analysis. The simulation model is built by considering all major and detailed operations and interacting systems of the blast furnace workshop. The workshop is ...
متن کاملProduction and Crystallization Behavior of an Iron Rich Glass–Ceramic Prepared by Ironmaking and Steelmaking Wastes
Using wastes as starting raw materials is a common method to reduce the production costs and the environmental pollution problems arising from such wastes. In this study the production and crystallization behavior of an iron rich glass prepared by iron and steel making wastes has been investigated. The raw materials used, were the blast furnace slag, the blast furnace dust, converter slag and s...
متن کاملTitanium in the Process of Smelting Pig Iron with an Increased Silicon Content
In connection with future utilization of magnetite titanium ores deposited in Poland in the region of Suwałki the test were performed to get information regarding the influence of titan and vanadium admixtures on the quality of pig iron and the run of blast furnace process. As a blast furnace charge, there were used magnetite titanium concentrates similar to the ores deposited in the Suwałki re...
متن کاملTechnical Effects of Air Cooled Blast Furnace Slag on Asphalt Mixtures
Air cooled blast furnace slag is a by product made of gradually air cooled molten blast furnace slag and is often stored in stockpiles near the iron mills and usually occupy a wide area around the iron mills. From this perspective the further use of these materials can have its own merits. Air cooled blast furnace slag can be used in asphalt mixtures because of their proper frictional propertie...
متن کاملEvaluation of Effectiveness of Raw Materials and Materials Use in a Blast Furnace Department of a Steelworks
E. Kardas, Z. Skuza Czestochowa University of Technology, Faculty of Production Engineering and Materials Technology, Czestochowa, Poland The paper analyses the quality of raw materials used in the production of blast furnace pig iron. The ferruginous sinter and pellets are the basic raw materials used in the process. The paper presents the impact of those raw materials quality on the effective...
متن کامل