Small Ceramic Patch Antenna for UHF RFID Tag Mountable On Metallic Objects
نویسندگان
چکیده
A very small UHF band RFID tag antenna using ceramic material mountable on metallic objects is presented. The proposed tag size is 25x25x3 mm. The impedance of the antenna can be easily matched to the complex conjugate of the tag chip impedance from the size of the shorting plate of the side patch and the size of the feeding loop. The antenna satisfactorily operates on metal plates, so it is applicable in many applications. The proposed design is verified by simulation and measurements which show good agreement.
منابع مشابه
UHF RFID Tag Antenna Using Meander Patch for Metallic Object
The use of radio frequency identification (RFID) system has increased noticeably in recent years. The tag antenna has been particularly influential in the performance of RFID system. Many applications require tag antennas to be of low profile mounted on electrically metallic objects. Several designs have been developed for RFID patch-type antennas or planar inverted-F antennas (PIFAs) mountable...
متن کاملCompact Metal Mountable Uhf Rfid Tag on a Barium Titanate Based Substrate
The development of a compact metal mountable RadioFrequency IDentification (RFID) tag antenna on a ceramic substrate based on Barium Titanate is presented. The performance limitations and design trade-offs of metal mountable RFID tag antennas are reviewed and the favorable features of a high-permittivity antenna substrate for the development of antennas for metal mountable RFID tags are discuss...
متن کاملSmall Wideband RFID Tag Antenna Mountable on Metallic Surfaces
The RFID (Radio Frequency Identification) system has recently become very popular in many industries. Inductively-coupled short-range RFIDs have already been used, but the demand for long-range identification has increased. Consequently, the RFID frequency has gone into the microwave region, which means that the tag antenna design has become an important factor in maximizing the read range of t...
متن کاملAnalysis of Low Profile UHF RFID Tag Antennas and Performance Evaluation in Presence of a Metallic Surface
Passive UHF RFID systems have drawn considerable attention because these can provide a long reading range, high data rate and small antenna size. However, a passive UHF RFID system has challenges in tagging a metallic object due to the effects of conducting materials on the tag antenna performance. This paper proposes two widely used label-type antennas: folded dipole antenna and meandered dipo...
متن کاملA Slim Wideband and Conformal Uhf Rfid Tag Antenna Based on U-shaped Slots for Metallic Objects
A slim wideband patch antenna designed for the ultrahigh frequency (UHF) band radio frequency identification (RFID) tag is presented in this paper, which can be mounted on flat or curved metallic surfaces directly. The presented antenna is fabricated on a very thin (only 0.5 mm) and low-cost PET substrate (εr = 3.8, tan δ = 0.02). The proposed design consists of tow coplanar patches radiation u...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2008