The Role of Isolation Transformers in Data Center UPS Systems
نویسنده
چکیده
Most modern UPS systems do not include the internal transformers that were present in earlier designs. This evolution has increased efficiency while decreasing the weight, size, and raw materials consumption of UPS systems. In the new transformerless UPS designs, the transformers are optional and can be placed in the best location to achieve a required purpose. In older designs, transformers were typically installed in permanent positions where they provided no benefit, reduced system efficiency, or were not optimally located.
منابع مشابه
Artificial Intelligence Based Approach for Identification of Current Transformer Saturation from Faults in Power Transformers
Protection systems have vital role in network reliability in short circuit mode and proper operating for relays. Current transformer often in transient and saturation under short circuit mode causes mal-operation of relays which will have undesirable effects. Therefore, proper and quick identification of Current transformer saturation is so important. In this paper, an Artificial Neural Network...
متن کاملA new model for Assessment and Optimization of Number of Spare Transformers and their Locations in Distribution Systems
In this paper, a new model has been presented to determine the number of spare transformers and their locations for distribution stations. The number of spare transformers must be so that they need minimum investment. Furthermore, they must be sufficient for replacing with transformers that have been damaged. For this reason, in this paper a new purpose function has been presented to maximize p...
متن کاملارائه یک سیستم ترکیبی جدید در تشخیص نوع خطا در ترانسفورماتورهای قدرت براساس مقادیر گازهای حل شده در روغن
Transformers are one of the important and at the same time expensive components of power systems. On timely diagnosis of fault in such systems is still among the researchers interest. Fault diagnosis of transformers based on the dissolved gas analysis is a new technique in the field of fault diagnosis of power transformers. IEC, Roger’s and Dornenburg techniques are the mostly used techni...
متن کاملDrive Isolation Transformers--Solutions to Power Quality
Introduction The increased use of ac and dc motor drives in industrial plants has elevated the power quality application considerations associated with power distribution systems. These considerations have sparked great controversy about the use of drives in industrial applications and have raised questions about their effects on an electrical system. Valuable guide standards, such as IEEE 519-...
متن کاملEffect of transformer symmetry on intrabody communication channel measurements using grounded instruments
Transformers with one winding terminal symmetrical with respect to ground (capacitances between their terminals and ground are the same) are referred to as balun transformers, and are often used for decoupling in the measurements of the intrabody communication (IBC) system transmission characteristics. We measured IBC system amplitude and phase transmission characteristics using three types of ...
متن کامل